manualshive.com logo in svg

HPE StoreOnce 6500, User Manual

The HPE StoreOnce 6500 is a cutting-edge data storage solution designed to meet the demanding needs of modern enterprises. It offers high capacity and unmatched performance, ensuring seamless backup and recovery. To unlock its full potential, users can easily access the comprehensive User Manual by visiting our website for free downloads.

Share
Download
background image

7.

All slots in the Target Library are selected by default, but you can deselect any cartridges that you do
not want to be recovered to the Source Library by checking the 

Pending One off Recovery

 box.

8.

Click 

Next

 to display the Summary page.

9.

Click 

Apply

 to run reverse replication.

As soon as reverse replication completes for each slot, the data may be recovered to the host using
the original backup application. This can take time because ALL the data must reverse replicate over
the WAN link.

New backups can now run to the Source Appliance and replication will run normally without further
configuration.

NAS Mappings (Replication)

This page displays details of all replication mappings between source and target shares. Administrator
users may use the two wizards on this page to configure replication mappings and recover mappings
after a disaster. (VT library mappings are managed on a separate page.) If a non-replicating share is
selected, no mappings are configured and the screen displays the Replication and Recovery Wizards.

Use this page to:

• View source and target share mappings (all users). See 

Source and target share details

 on page

69.

Administrator users may also remove share mappings and edit share mappings.

• Run the Replication Wizard to create new share mappings (administrator users only). See 

Running

the replication wizard (NAS)

 on page 72.

• Run the Replication Recovery Wizard to recover share mappings. See 

Recovering a source

appliance (NAS shares)

 on page 73.

NOTE: 

Only administrators can manage mappings. You can only map and replicate deduplicating shares

and map shares of the same version.

Source and target share details

The top half of the NAS Mappings page contains a list of all available NAS shares that were configured
on this StoreOnce System.

•

Non Replicating

: a share on this StoreOnce System that has not yet been mapped for replication.

Replication and Recovering Wizards are available only with non-replicating shares.

•

Replication Source

: a share on this StoreOnce System that has been mapped for replication.

•

Replication Target

: a share on this StoreOnce System that has been replicated from a Replication-

Source share.

NAS Mappings (Replication)

69

Summary of Contents for StoreOnce 6500



































































































































































































































































Reviews:

No comments

Related manuals for StoreOnce 6500

NOMACHINE D-811_002-NXS-SAG Administrator'S Manual preview
D-811_002-NXS-SAG
Brand: NOMACHINE Pages: 19
hager TJA670 domovea Basic Manual preview
TJA670 domovea Basic
Brand: hager Pages: 36
Belkin F1UP0001uk Basic Manual preview
F1UP0001uk
Brand: Belkin Pages: 8
Seyeon Technology FlexWATCH 1110L User Manual preview
FlexWATCH 1110L
Brand: Seyeon Technology Pages: 96
TYANO TS65A-B8036 Service Engineer'S Manual preview
TS65A-B8036
Brand: TYANO Pages: 102
3Com CS/3000-48 Installation Manual preview
CS/3000-48
Brand: 3Com Pages: 122
ASROCK 2U4FH-12L User Manual preview
2U4FH-12L
Brand: ASROCK Pages: 40
IOGear GPSU21 Installation Manual preview
GPSU21
Brand: IOGear Pages: 48
Brother 1870N - HL B/W Laser Printer User Manual preview
1870N - HL B/W Laser Printer
Brand: Brother Pages: 204
Thecus N299 User Manual preview
N299
Brand: Thecus Pages: 94
USR IOT USR-N668 User Manual preview
USR-N668
Brand: USR IOT Pages: 48
Black Box LES424A Quick Start Manual preview
LES424A
Brand: Black Box Pages: 2
Vision Hi-Tech NVS202 Quick Installation Manual preview
NVS202
Brand: Vision Hi-Tech Pages: 2
Multitech MultiAccess MA220 User Manual preview
MultiAccess MA220
Brand: Multitech Pages: 80
B&B Electronics ESP904 Owner'S Manual preview
ESP904
Brand: B&B Electronics Pages: 39
3onedata NP30XT series User Manual preview
NP30XT series
Brand: 3onedata Pages: 20
Supero AS-1010S-T User Manual preview
AS-1010S-T
Brand: Supero Pages: 100
Supero AS-1011M-UR User Manual preview
AS-1011M-UR
Brand: Supero Pages: 104

Brands by name

Popular brands

Load more brands