HPE StoreOnce 6500 User Manual Download Page 140

Page: 140 / 258

Modifying appliance details

Procedure

On the

Appliance Registration

page, select the appliance you would like to modify. The Alias and IP

addresses of all registered appliances appear on this page.

Click

Modify

The Modify Appliance Details window opens.

On the Modify Appliance Details window, update the appliance details as needed. See

Registering an

appliance

on page 137 for more information about the fields in this dialog box.

Click

Unregister an appliance

Procedure

On the

Appliance Registration

page, select the appliance you would like to unregister. The Alias and

IP addresses of all registered appliances appear on this page.

Click

Unregister

. You will see the IP address of the appliance you have selected.

Click

All details for this appliance in appliance groups and all virtual devices in virtual device groups are
removed.

NOTE:

Devices on this appliance that were added to device groups may still appear in the device

group list, as

Unable to connect

. See

Removing a device from a device group

on page 146 to

remove these devices.

Viewing license information

The

Licenses

page displays sections covering all available license types for your product. Any applied

licenses will be listed underneath the appropriate section. You can also view licenses on remote
appliances using the Appliance drop-down box.

Hardware license fields

For StoreOnce hardware products, there will be multiple license fields on the

Licenses

page:

• Capacity Expansion Licenses: Required when additional storage is added to StoreOnce Systems

• Security Licenses: Required for Data at Rest Encryption, Data in Flight Encryption, and Secure Erase.

The license is per couplet, but each couplet must have a Security license installed.

• Catalyst Licenses: Required on each target site (or couplet) where StoreOnce Catalyst is used and

each couplet must have a StoreOnce Catalyst license installed

• Replication Licenses: Required on each target site (or couplet) where Replication is used

140

Modifying appliance details

Summary of Contents for StoreOnce 6500



































































































































































































































































Search results

Summary of Contents for StoreOnce 6500

Reviews:

Related manuals for StoreOnce 6500

Brands by name

Popular brands

HPE StoreOnce 6500, User Manual

Search results

Summary of Contents for StoreOnce 6500

Reviews:

Related manuals for StoreOnce 6500

Brands by name

Popular brands