IP Addresses
NS2100 systems require Internet protocol (IP) addresses for these components that are connected
to the dedicated service LAN:
•
VIO enclosure logic boards
•
Maintenance switches
•
System consoles
•
CLIM maintenance interfaces (eth0)
•
CLIM iLOs
•
Blade iLOs
•
UPSs (optional)
•
Intelligent PDUs (iPDUs)
These components have default IP addresses that are preconfigured at the factory. You can
change these preconfigured IP addresses to addresses appropriate for the LAN environment:
Used By
Default IP Address
Group.Module.Slot
Component
OSM Low-Level Link
192.168.36.202
100.2
VIO enclosure
192.168.36.203
100.3
OSM Service Connection
192.168.36.21
N/A
Maintenance switch
(rack-mounted)
192.168.36.22 -
192.168.36.30
N/A
Maintenance switch (ProCurve)
(Additional switches)
192.168.36.12 -
192.168.36.20
N/A
Maintenance switch (ProCurve)
(More than 10 switches)
192.168.42.11
N/A
iPDU in rack 1, front mounting
rail
192.168.42.12
N/A
iPDU in rack 1, rear mounting
rail
192.168.42.21
N/A
iPDU in rack 2, front mounting
rail
192.168.42.22
N/A
iPDU in rack 2, rear mounting
rail
192.168.42.31
N/A
iPDU in rack 3, front mounting
rail
192.168.42.32
N/A
iPDU in rack 3, rear mounting
rail
192.168.36.1
N/A
Primary system console
(rack-mounted or stand-alone)
OSM Low-Level Link
OSM Service Connection
OSM Notification Director
192.168.36.2
N/A
Backup system console
(rack-mounted only)
192.168.36.5
N/A
Up to two additional system
consoles (rack-mounted only)
192.168.36.6
OSM Service Connection
CLIM Maintenance Interfaces
(eth0)
192.168.36.41
CLIM at 100.2.3.1
192.168.36.42
CLIM at 100.2.3.2
192.168.36.43
CLIM at 100.2.3.3
192.168.36.44
CLIM at 100.2.3.4
192.168.36.51
CLIM at 100.2.4.1
98
Maintenance and Support Connectivity
