About This Document
This guide describes the HPE Integrity NonStop NS2100 system and provides examples of
system configurations to assist you in planning for installation of a new system.
Supported Release Version Updates (RVUs)
This publication supports J06.14 and all subsequent J-series RVUs until otherwise indicated by
its replacement publication.
Intended Audience
This guide is written for those responsible for planning the installation, configuration, and
maintenance of the server and the software environment at a particular site. Appropriate personnel
must have completed Hewlett Packard Enterprise training courses on system support for Integrity
NS2100 systems.
NOTE:
NS2100 systems refers to hardware systems. J-series refers to release version updates
(RVUs).
New and Changed Information in 697513-004R
Updated Hewlett Packard Enterprise references.
New and Changed Information in 697513-004
The DL380p Gen8 IP, Telco, and Storage CLIMs are now supported for NS2100 systems. The
following topics have been added or modified:
•
“NS2100 System Overview” (page 13)
•
“CLuster I/O Modules (CLIMs)” (page 16)
•
“CLIM Connection Group-Module-Slot-Port Numbering ” (page 33)
•
“Uninterruptible Power Supply (UPS)” (page 40)
•
“Enclosure Power Loads” (page 60)
•
“Enclosure Dimensions ” (page 66)
•
“Modular Cabinet and Enclosure Weights With Worksheet” (page 67)
•
“Heat Dissipation Specifications and Worksheet” (page 69)
•
“SAS Ports to SAS Disk Enclosures” (page 74)
•
“Storage CLIM Devices” (page 74)
•
“Ethernet to Networks” (page 84)
•
“IP CLIM Ethernet Interfaces” (page 84)
•
“Telco CLIM Ethernet Interfaces” (page 86)
•
“Cable Length Restrictions” (page 104)
Added information for ride-through time for a Hewlett Packard Enterprise-supported UPS:
•
“Uninterruptible Power Supply (UPS)” (page 40)
•
“AC Power Monitoring” (page 62)
•
“UPS and Data Center Power Configurations” (page 111)
8