5 Hardware Configuration in NS2100 Cabinets
This section shows locations of hardware components within 36 and 42 U modular cabinets for
an NS2100 commercial server.
NOTE:
Hardware configuration drawings in this section represent the physical arrangement
of the modular enclosures but do not fully show the PDUs. For information about PDUs, see
“Power Distribution for NS2100 Systems” (page 44)
Maximum Number of Modular Components, NS2100 System
This table shows the maximum number of the modular components installed in an NS2100
system. These values might not reflect the system you are planning and are provided only as an
example, not as exact values.
NS2100 system
Enclosure or Component
1
4-processor
2-processor
4
2
Blade element
2
2
System console
2
2
VIO enclosure
4
4
Storage CLIM
2
2
IP CLIM
2
2
Telco CLIM
1
1
CLIM patch panel
8
4
SAS disk enclosure
2
2
Maintenance switch
1
1
HPE R5000 UPS (for single-phase)
1
1
HPE R12000/3 UPS (for three-phase)
2
2
Extended runtime module (ERM) (for
single-phase)
2
2
ERM (for three-phase)
1
See
“IP and Telco CLIM Coexistence Limits ” (page 88)
for information about coexistence limits for IP and Telco CLIMs.
IP and Telco CLIM Coexistence Limits
Your NS2100 system supports the following combinations of IP and Telco CLIMs:
CLIM Coexistence Limits
6 Supported Combinations
Telco CLIM
IP CLIM
0
0
0
1
1
0
1
1
88
Hardware Configuration in NS2100 Cabinets
