HPE Integrity NonStop NS2100 Planning Manual Download Page 3

Page: 3 / 128

Contents

About This Document.............................................................................................8

General Syntax Notation...............................................................................................................10

Publishing History...............................................................................................................................12

1 NS2100 System Overview.................................................................................13

NS2100 Hardware .............................................................................................................................14

Blade Element (rx2800 i2) ............................................................................................................15
Versatile I/O (VIO) Enclosure .......................................................................................................15
CLuster I/O Modules (CLIMs)........................................................................................................16

Storage CLuster I/O Module (CLIM)........................................................................................17
IP CLuster I/O Module (CLIM) (Optional).................................................................................19

Telco CLuster I/O Module (CLIM) (Optional)............................................................................21

DL380 G6 Telco CLIM — Five Ethernet Copper Ports.......................................................22
DL380p Gen8 Telco CLIM — Option 1 Five Ethernet Copper Ports...................................22
DL380p Gen8 Telco CLIM — Option 2 Three Ethernet Copper and Two Ethernet Optical
Ports....................................................................................................................................23

CLIM Cable Management Ethernet Patch Panel.....................................................................23

UPS for a Single-Phase Power Configuration (Optional).........................................................25
UPS for a Three-Phase Power Configuration (Optional).........................................................25

ERM (Optional with UPS)..............................................................................................................26
Enterprise Storage System — ESS (Optional)..............................................................................26
Tape Drive and Interface Hardware (Optional)..............................................................................27

Preparation for Other Hardware.........................................................................................................27
Component Location and Identification in an NS2100 System..........................................................27

System Installation Document Packet ...............................................................................................36

Tech Memo for the Factory-Installed Hardware Configuration .....................................................36
Configuration Forms for the CLIMs and ServerNet Adapters .......................................................37

2 Site Preparation Guidelines for NS2100 Systems.............................................38

Modular Cabinet Power and I/O Cable Entry......................................................................................38

Contents

Summary of Contents for Integrity NonStop NS2100

































































































































Search results

Summary of Contents for Integrity NonStop NS2100

Reviews:

Related manuals for Integrity NonStop NS2100

Brands by name

Popular brands

HPE Integrity NonStop NS2100, Planning Manual

Search results

Summary of Contents for Integrity NonStop NS2100

Reviews:

Related manuals for Integrity NonStop NS2100

Brands by name

Popular brands