ServerNet Fabric
Destination
Processor
Source Disk
Description
Load Path
X
1
$SYSTEM-M
Mirror backup
15
Y
1
$SYSTEM-M
Mirror backup
16
The command interpreter input file (CIIN) is automatically invoked after the first processor is
loaded. The CIIN file shipped with new systems contains the TACL RELOAD * command, which
loads the remaining processors.
For default configurations of the HBA SAS ports, SAS disk enclosures, and load disks, see
“Configurations for Storage CLIMs and SAS Disk Enclosures” (page 76)
.
Default Naming Conventions
An NS2100 system implements default naming conventions in the same manner as other Integrity
NonStop NS-series systems.
With a few exceptions, default naming conventions are not necessary for the modular resources
that make up an NS2100 system. In most cases, users can name their resources at will and use
the appropriate management applications and tools to find the location of the resource.
However, default naming conventions for certain resources simplify creation of the initial
configuration files and automatic generation of the names of the modular resources.
Preconfigured default resource names are:
Description
Example
Naming Convention
1
Type of Object
Twentieth ESS disk drive in
the system
$ESS20
$ESS
number
ESS disk drive
2
Twentieth SAS disk volume
in the system
$SAS20
$SAS
number
SAS disk enclosure/SAS
CG disk enclosure
First modular tape drive in
the system
$TAPE01
$TAPE
number
Modular tape drive
IP CLIM which has the X1
attachment point to the VIO
N100241
N
group module slot
port
IP CLIM
enclosure located in group
100, module 2, slot 4, port
1
Telco CLIM which has the
X1 attachment point to the
O100243
O
group module slot
port
Telco CLIM
VIO enclosure located in
group 100, module 2, slot 4,
port 3
Storage CLIM which has the
X1 attachment point to the
S100233
S
group module slot
port
Storage CLIM
VIO enclosure located in
group 100, module 2, slot 3,
port 3
Ethernet connection in
location 100.2.7
G10027
G group module slot
Ethernet
LIF for PIF at location
100.2.7.0.B
L10027B
L group module slot port
Ethernet LIF
First TCP6SAM or TCP/IP
process for the system
$ZTC0
$ZTC number
TCP/IP process
First Telserv process for the
system
$ZTN0
$ZTN number
Telserv process
Default Naming Conventions
109
