manualshive.com logo in svg

HPE FlexNetwork 10500 SERIES, Configuration Manual

The HPE FlexNetwork 10500 SERIES comes with a comprehensive Configuration Manual that enables users to expertly set up and optimize their network infrastructure. This essential manual is readily available for free download from our website, ensuring easy access to detailed instructions and valuable insights for maximizing network performance.

Share
Download
background image

 

149 

Step 

Command 

Remark 

2. 

Enable NETCONF over 
SOAP. 

•

 

Enable NETCONF over SOAP 
over HTTP (not available in FIPS 
mode): 

netconf soap http enable 

•

 

Enable NETCONF over SOAP 
over HTTPS:

  

netconf soap https enable 

By default, the NETCONF over 
SOAP feature is disabled. 

3. 

Set the DSCP value for 
NETCONF over SOAP 
packets. 

•

 

Set the DSCP value for 
NETCONF over SOAP over 
HTTP packets: 

netconf soap http dscp

 

dscp-value

 

•

 

Set the DSCP value for 
NETCONF over SOAP over 
HTTPs packets: 

netconf soap https dscp 
dscp-value

 

By default, the DSCP value is 0 
for NETCONF over SOAP 
packets. 

4. 

Apply an ACL to 
NETCONF over SOAP 
traffic. 

•

 

Apply an ACL to NETCONF over 
SOAP over HTTP traffic (not 
available in FIPS mode): 

netconf soap http acl 

{

 acl-number 

| 

name acl-name 

} 

•

 

Apply an ACL to NETCONF over 
SOAP over HTTPS traffic: 

netconf soap https

 

acl 

{

 acl-number 

| 

name acl-name 

} 

By default, no ACL is applied to 
NETCONF over SOAP traffic. 

5. 

Specify a mandatory 
authentication domain for 
NETCONF users. 

netconf soap domain

 

domain-name

 

By default, no mandatory 
authentication domain is 
specified for NETCONF users. 
For information about 
authentication domains, see 

Security Configuration Guide

. 

 

Enabling NETCONF over SSH 

This feature allows users to use a client to perform NETCONF operations on the device through a 
NETCONF over SSH connection. 

To enable NETCONF over SSH: 

 

Step 

Command 

Remark 

1. 

Enter system view. 

system-view 

N/A

 

2. 

Enable NETCONF over 
SSH. 

netconf ssh server enable 

By default, NETCONF over SSH is 
disabled.

 

3. 

Specify a port to listen for 
NETCONF over SSH 
connections. 

netconf ssh server port

 

port-number 

By default, port 830 listens for 
NETCONF over SSH connections.

 

 

Enabling NETCONF logging 

NETCONF logging generates logs for different NETCONF operation sources and NETCONF 
operations. 

Summary of Contents for FlexNetwork 10500 SERIES
























































































































































































































































































































































































































Reviews:

No comments

Related manuals for FlexNetwork 10500 SERIES

IBM 51 Troubleshooting Manual preview
51
Brand: IBM Pages: 248
3Com IntelliJack NJ200 Datasheet preview
IntelliJack NJ200
Brand: 3Com Pages: 4
iDirect Evolution X3 Installation And Safety Manual preview
Evolution X3
Brand: iDirect Pages: 60
Avid Technology MediaStream ConnectPlus 1000 Installation And Operation Manual preview
MediaStream ConnectPlus 1000
Brand: Avid Technology Pages: 74
NETGEAR RP334 Installation Manual preview
RP334
Brand: NETGEAR Pages: 2
Devolo Magic WiFi mini Ek Manual preview
Magic WiFi mini Ek
Brand: Devolo Pages: 22
Buffalo LinkStation Quick Setup Manual preview
LinkStation
Brand: Buffalo Pages: 2
ADC HiGain H2TU-R-402 List 7A Quick Installation preview
HiGain H2TU-R-402 List 7A
Brand: ADC Pages: 7
Renesas H8S/2633 User Manual preview
H8S/2633
Brand: Renesas Pages: 28
Zalip CDG561 WE~P21 User Manual preview
CDG561 WE~P21
Brand: Zalip Pages: 77
Linksys EtherFast LNE100TX ver. 5 User Manual preview
EtherFast LNE100TX ver. 5
Brand: Linksys Pages: 42
UTStarcom UT-300R2U User Manual preview
UT-300R2U
Brand: UTStarcom Pages: 71
T-COM Sinus 154 data II Quick Start Manual preview
Sinus 154 data II
Brand: T-COM Pages: 12
NetComm 4GM3W User Manual preview
4GM3W
Brand: NetComm Pages: 65
MCT MPU100ZW User Manual preview
MPU100ZW
Brand: MCT Pages: 12
Extreme Networks Summit WM3400 Installation Manual preview
Summit WM3400
Brand: Extreme Networks Pages: 51
NETGEAR DGN2200M - Wireless-N 300 Router User Manual preview
DGN2200M - Wireless-N 300 Router
Brand: NETGEAR Pages: 95
ZyXEL Communications ONU5100-B22 User Manual preview
ONU5100-B22
Brand: ZyXEL Communications Pages: 2

Brands by name

Popular brands

Load more brands