38
Step
Command
Remarks
8.
(Optional.) Enter raw request
view.
raw-request
This step is required for the
raw
operation.
Every time you enter the raw request
view, the existing request content
configuration is removed.
9.
(Optional.) Enter or paste the
content of the HTTP request
for the HTTP operation.
N/A
This step is required for the
raw
operation.
By default, the HTTP request content
is not specified.
10.
(Optional.) Return to HTTP
template view.
quit
The system automatically saves the
configuration in raw request view
before it returns to HTTP template
view.
11.
(Optional.) Specify the source
IP address for the probe
packets.
•
IPv4 address:
source ip
ip-address
•
IPv6 address:
source ipv6
ipv6-address
By default, the packets take the
primary IP address of the output
interface as their source IP address.
The source IP address must be the IP
address of a local interface, and the
interface must be up. Otherwise, no
probe packets can be sent out.
12.
(Optional.) Configure the
expected status codes.
expect status status-list
By default, no expected status code is
configured.
13.
(Optional.) Configure the
expected data.
expect data expression
[
offset
number
]
By default, no expected data is
configured.
Configuring the HTTPS template
A feature that uses the HTTPS template performs the HTTPS operation to measure the time it takes
for the NQA client to obtain data from an HTTPS server.
The expected data is checked only when the expected data is configured and the HTTPS response
contains the Content-Length field in the HTTPS header.
The status code of the HTTPS packet is a three-digit field in decimal notation, and it includes the
status information for the HTTPS server. The first digit defines the class of response.
Before you perform the HTTPS operation, configure the HTTPS server and the SSL client policy for
the SSL client. For information about configuring SSL client policies, see
Security Configuration
Guide
.
To configure the HTTPS template:
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Create an HTTPS template
and enter its view.
nqa template https name
By default, no HTTPS templates exist.
3.
Specify the URL of the
destination HTTPS server.
url url
By default, no URL is specified for the
destination HTTPS server.
Enter the URL in one of the following
formats:
•
https://
host
/
resource.
•
https://
host
:
port
/
resource.
Summary of Contents for FlexNetwork 10500 SERIES
Page 224: ...213 ...
Page 311: ...300 Now the system can record log information to the specified file ...