HPE FlexNetwork 10500 SERIES, Configuration Manual

Page: 44 / 407

33
Step Command Remarks
7. (Optional.) Specify the
next hop IP address for
ICMP echo requests.
•
IPv4 address:
next-hop ip ip-address
•
IPv6 address:
next-hop ipv6 ipv6-address
By default, no IP address of the next
hop is configured.
8. (Optional.) Configure the
probe result sending on a
per-probe basis.
reaction trigger per-probe
By default, the probe result is sent to
the feature that uses the template
after three consecutive failed or
successful probes.
If you execute the reaction trigger
per-probe and reaction trigger
probe-pass commands multiple
times, the most recent configuration
takes effect.
If you execute the
reaction trigger
per-probe and reaction trigger
probe-fail commands multiple times,
the most recent configuration takes
effect.
Configuring the DNS template
A feature that uses the DNS template performs the DNS operation to determine the status of the
server. It is supported in both IPv4 and IPv6 networks.
In DNS template view, you can specify the address expected to be returned. If the returned IP
addresses include the expected address, the DNS server is valid and the operation succeeds.
Otherwise, the operation fails.
Create a mapping between the domain name and an address before you perform the DNS operation.
For information about configuring the DNS server, see
Layer 3—IP Services Configuration Guide .
To configure the DNS template:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Create a DNS template and
enter DNS template view.
nqa template dns name
By default, no DNS templates
exist.
3. (Optional.) Specify the
destination IP address of DNS
packets.
•
IPv4 address:
destination ip ip-address
•
IPv6 address:
destination ipv6
ipv6-address
By default, no destination
address is specified.
4. (Optional.) Specify the
destination port number for
the operation.
destination port port-number
By default, the destination port
number is 53.
5. Specify the domain name to
be translated.
resolve-target domain-name
By default, no domain name is
specified.
6. Specify the domain name
resolution type.
resolve-type { A | AAAA }
By default, the type is type A.
A type A query resolves a
domain name to a mapped IPv4
address, and a type AAAA
query to a mapped IPv6
address.