HPE FlexNetwork 10500 SERIES, Configuration Manual

Page: 26 / 407

15
Step Command Remarks
5. Specify the domain name to
be translated.
resolve-target domain-name
By default, no domain name is
specified.
Configuring the FTP operation
The FTP operation measures the time for the NQA client to transfer a file to or download a file from
an FTP server.
When you configure the FTP operation, follow these restrictions and guidelines:
•
When you perform the put operation with the filename command configured, make sure the file
exists on the NQA client.
•
If you get a file from the FTP server, make sure the file specified in the URL exists on the FTP
server.
•
The NQA client does not save the file obtained from the FTP server.
•
Use a small file for the FTP operation. A big file might result in transfer failure because of
timeout, or might affect other services for occupying much network bandwidth.
To configure the FTP operation:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Create an NQA operation
and enter NQA operation
view.
nqa entry admin-name
operation-tag
By default, no NQA operations exist.
3. Specify the FTP type and
enter its view.
type ftp N/A
4. Specify the URL of the
destination FTP server.
url url
By default, no URL is specified for the
destination FTP server.
Enter the URL in one of the following
formats:
•
ftp:// host / filename.
•
ftp:// host:port / filename.
When you perform the get operation, the
file name is required.
5. (Optional.) Specify the
source IP address of FTP
request packets.
source ip ip-address
By default, the packets take the primary
IP address of the output interface as their
source IP address.
The source IP address must be the IP
address of a local interface, and the
interface must be up. Otherwise, no FTP
requests can be sent out.
6. (Optional.) Specify the FTP
operation type.
operation
{
get
|
put
}
By default, the FTP operation type is get ,
which means obtaining files from the FTP
server.
7. Specify an FTP login
username.
username username
By default, no FTP login username is
configured.
8. Specify an FTP login
password.
password { cipher |
simple } string
By default, no FTP login password is
configured.