HPE FlexNetwork 10500 SERIES, Configuration Manual

Page: 295 / 407

284
Table 21 Default output rule for security logs
Destination Log source modules Output switch Severity
Security log file All supported modules Disabled Debug
Default output rules for hidden logs
Hidden logs can be output to the log host, the log buffer, and the log file. Table 22 shows the default
output rules for hidden logs.
Table 22 Default output rules for hidden logs
Destination Log source modules Output switch Severity
Log host All supported modules Enabled Informational
Log buffer All supported modules Enabled Informational
Log file All supported modules Enabled Informational
Default output rules for trace logs
Trace logs can only be output to the trace log file, and cannot be filtered by source modules and
severity levels.
Table 23 shows the default output rules for trace logs.
Table 23 Default output rules for trace logs
Destination Log source modules Output switch Severity
Trace log file All supported modules Enabled Debugging
Log formats
The format of logs varies by output destinations, as shown in Table 24 .
Table 24 Log formats
Output destination Format Example
Console, monitor
terminal, log buffer, or log
file
Prefix Timestamp Sysname
Module/Level/Mnemonic: Content
%Nov 24 14:21:43:502 2010
Sysname SHELL/5/SHELL_LOGIN:
VTY logged in from 192.168.1.26