HPE FlexNetwork 10500 SERIES, Configuration Manual

Page: 170 / 407

159
Performing the get-config/get-bulk-config operation
The get-config and get-bulk-config operations are used to retrieve all non-default settings, which are
configured by means of CLI, MIB, and Web. The <get-config> and <get-bulk-config> messages can
contain the <filter> element for filtering data.
The <get-config> and <get-bulk-config> messages are similar. The following is a <get-config>
message example:
<?xml version="1.0"?>
<rpc message-id="100" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<get-config>
<source>
<running/>
</source>
<filter>
<top xmlns="http://www.hp.com/netconf/config:1.0">
Specify the module name, submodule name, table name, and column name
</top>
</filter>
</get-config>
</rpc>
Verifying the configuration
After receiving the get-config request, the device returns a response in the following format if the
operation is successful:
<?xml version="1.0"?>
<rpc-reply message-id="100" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<data>
All data matching the specified filter
</data>
</rpc-reply>
Performing the edit-config operation
The edit-config operation supports the following operation attributes: merge , create , replace ,
remove , delete , default-operation , error-option , test-option , and incremental . For more
information about these attributes, see " Appendix A Supported NETCONF operations ."
# Copy the following text to perform the <edit-config> operation:
<?xml version="1.0"?>
<rpc message-id="100" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<edit-config>
<target><running></running></target>
<error-option>
Default operation when an error occurs
</error-option>
<config>
<top xmlns="http://www.hp.com/netconf/config:1.0">
Specify the module name, submodule name, table name, and column name
</top>
</config>