HPE FlexNetwork 10500 SERIES, Configuration Manual

Page: 29 / 407

18
Step Command Remarks
6. (Optional.) Specify the
source IP address for UDP
packets.
source ip ip-address
By default, the packets take the
primary IP address of the output
interface as their source IP
address.
The source IP address must be
the IP address of a local interface,
and the interface must be up.
Otherwise, no UDP packets can
be sent out.
7. (Optional.) Specify the
source port number of UDP
packets.
source port port-number
By default, no source port number
is specified.
8. (Optional.) Set the payload
size for each UDP packet.
data-size size The default setting is 100 bytes.
9. (Optional.) Specify the
payload fill string for UDP
packets.
data-fill string
The default payload fill string is
the hexhexadecimal string
00010203040506070809.
10. (Optional.) Set the number of
UDP packets sent in one
UDP jitter operation.
probe packet-number
packet-number
The default setting is 10.
11. (Optional.) Set the interval
for sending UDP packets.
probe packet-interval interval
The default setting is 20
milliseconds.
12. (Optional.) Specify how long
the NQA client waits for a
response from the server
before it regards the
response times out.
probe packet-timeout timeout
The default setting is 3000
milliseconds.
NOTE:
Use the display nqa result or display nqa statistics command to verify the UDP jitter operation.
The display nqa history command does not display the UDP jitter operation results or statistics.
Configuring the SNMP operation
The SNMP operation measures the time for the NQA client to get a response packet from an SNMP
agent.
To configure the SNMP operation:
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Create an NQA operation
and enter NQA operation
view.
nqa entry admin-name
operation-tag
By default, no NQA operations exist.
3. Specify the SNMP type and
enter its view.
type snmp N/A
4. Specify the destination
address of SNMP packets.
destination ip ip-address
By default, no destination IP address
is specified.
5. (Optional.) Specify the
source port of SNMP
packets.
source port port-number
By default, no source port number is
specified.