NOTE:
The webcam module and microphone module are similar in appearance and installed in the
same location. The removal procedures are the same for both modules.
CAUTION:
Handle the module with caution. This module has a thin profile and is susceptible to damage
when not handled carefully.
a.
Detach the webcam or microphone module (1) from the display enclosure. (The module is attached
to the display enclosure with double-sided adhesive.)
b.
Remove the tape (2) covering the cable.
c.
Disconnect the module cable (3) from the module.
The webcam module is available using spare part number 848264-001.
The microphone module is available using spare part number 854110-001.
7.
If it is necessary to replace the Dream Color calibration board:
a.
Disconnect the calibration board cable (1) from the board.
70
Chapter 6 Removal and replacement procedures for authorized service provider parts