HP Vectra VE4 User Manual Download

Page: 85 / 141

HP Vectra PC User's Guide

4 Troubleshooting

••

The Printer Does Not Work

1. Check that the power cable is plugged into the power source and the printer.

2. Check that the printer’s power switch is on, and the printer is online.

3. Examine the paper feed for a paper jam.

4. Check that you have the correct cable for the printer. Make sure that it is securely

connected to the correct connector (port) on the PC and printer.

5. Check that the printer is configured correctly for the PC and for the application:

a. Check that the PC’s port has been correctly configured using the Setup program.

b. Check that the printer is correctly set up in Windows.

NOTE

If you are asked to insert a diskette when installing a printer, type

C:\WINDOWS\OPTIONS

and press

ENTER

. All of the Windows printer drivers are

located in this subdirectory.

c. Ensure the application program’s “print” menu has been correctly set up. (Refer to

the application manuals.)

6. Check that the PC’s port is working properly by running another peripheral connected to

the port.

7. If you receive an error message, refer to the printer’s manual for help.

Summary of Contents for Vectra VE4














































































































































Search results

Summary of Contents for Vectra VE4

Reviews:

Related manuals for Vectra VE4

Brands by name

Popular brands

HP Vectra VE4, User Manual

Search results

Summary of Contents for Vectra VE4

Reviews:

Related manuals for Vectra VE4

Brands by name

Popular brands