manualshive.com logo in svg

HP Vectra VE4, User Manual

Share
Download
HP Vectra VE4 User Manual Download Page 121

 HP Vectra PC User's Guide

6  Getting Support  

••

  121

HP Forum on CompuServe

The HP Systems Forum on CompuServe is an online service accessible via modem. This
service provides information about your HP PC, and allows you to communicate with other
HP users.

As a preferred Hewlett-Packard customer, you are invited to join CompuServe at no charge.

For the United States and the United Kingdom, simply call the number shown below and ask
for representative #51. For all other locations, you should first call the Worldwide number to
obtain the number of your local sales office, then call your local sales office and ask for
representative #51.

Country

Local Call / Freephone
number

Direct number

United States

1 (800) 848-8199

+1 (614) 529-1349

United Kingdom

(0800) 289378

+44 (1272) 760680

Worldwide

—

+1 (614) 529-1349

CompuServe will send you a free introductory membership immediately, including
information on how to access CompuServe.

At the CompuServe 

!

 prompt type 

GO HP

.

Summary of Contents for Vectra VE4














































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands