manualshive.com logo in svg

HP StoreEver MSL3040, User'S And Service Manual

The HP StoreEver MSL3040 is a high-performance tape library designed for data storage and backup needs. Unlock the full potential of this product by downloading the free User's and Service Manual from our website, providing you with detailed instructions and information.

Share
Download
background image

When you update the library firmware, the library will update the firmware of the expansion modules to a
compatible version.

Managing drive firmware from the RMI

Drive firmware can be updated on multiple drives of the same type at the same time. Drive firmware can
only be updated from the RMI. Each drive will only accept appropriate firmware.

Procedure

1.

In the RMI, navigate to the 

Maintenance > Firmware Upgrades > Drive Firmware

 screen.

2.

The tape drives are organized by drive type.

3.

Expand the appropriate drive type and select one or more of the tape drives.

4.

Click 

Choose File

, and then select the firmware file from the local computer.

5.

Click 

Submit

.

More information

To see the firmware version currently installed on the drives, navigate to the 

Status > Drive Status

screen.

Downloading a tape drive support ticket

Procedure

1.

Navigate to the 

Maintenance > Download Support Ticket

 screen.

2.

Expand the drive support ticket list, if necessary, by clicking the down arrow on the left side. The drive
list displays:

•

Drive

—The drive number. Drives are numbered starting with one from the physical bottom of the

library to the top.

•

Type

—The drive form factor (half height or full height) and interface

•

Firmware

—The current drive firmware version

•

Serial

—The drive serial number

•

Unit

—The module containing the tape drive

•

Partition

—The logical library associated with the tape drive

3.

Select the ticket to download.

•

Current Ticket

—Pulls and saves a new support ticket from the drive. The Current Ticket contains

detailed drive logs and are useful when working on an issue with a service engineer.

•

Last Unload Ticket

 (LTO-6 and earlier)—Saves the ticket that was pulled automatically after the

last cartridge was unloaded from the drive.

•

Health Log

 (LTO-7 and later)—Pulls and saves a new support ticket with less information than the

Current Ticket. The Health Log is faster to download when you only need basic drive health
information.

Managing drive firmware from the RMI

103

Summary of Contents for StoreEver MSL3040





















































































































































































































































Reviews:

No comments

Related manuals for StoreEver MSL3040

Campbell SC115 Product Manual preview
SC115
Brand: Campbell Pages: 32
IBM DS8000 - ADDITIONAL INFORMATION Manual preview
DS8000 - ADDITIONAL INFORMATION
Brand: IBM Pages: 5
IBM System Storage TS7600 ProtecTIER Series Software Upgrade Manual preview
System Storage TS7600 ProtecTIER Series
Brand: IBM Pages: 132
IBM Storwize V7000 Troubleshooting And Maintenance Manual preview
Storwize V7000
Brand: IBM Pages: 188
Qsan XCubeNAS XN7012R Quick Installation Manual preview
XCubeNAS XN7012R
Brand: Qsan Pages: 16
7-BIT Wicher CDTV User Manual preview
Wicher CDTV
Brand: 7-BIT Pages: 8
Plasmon MOD 910 User Manual preview
MOD 910
Brand: Plasmon Pages: 33
SPAREHAND Catalina KC-103 Quick Start Manual preview
Catalina KC-103
Brand: SPAREHAND Pages: 2
Western Digital WD3000F9YZ Applications preview
WD3000F9YZ
Brand: Western Digital Pages: 2
HP StoreAll 8000 Quickspecs preview
StoreAll 8000
Brand: HP Pages: 18
HP StorageWorks 2500 User Manual preview
StorageWorks 2500
Brand: HP Pages: 91
HP StorageWorks RDX Quickspecs preview
StorageWorks RDX
Brand: HP Pages: 12
HP StorageWorks 2012i User Manual preview
StorageWorks 2012i
Brand: HP Pages: 86
HP StorageWorks SB40c Maintenance And Service Manual preview
StorageWorks SB40c
Brand: HP Pages: 36
HP StorageWorks X5000 Release Note preview
StorageWorks X5000
Brand: HP Pages: 39
HP StorageWorks SB40c Specification preview
StorageWorks SB40c
Brand: HP Pages: 10
HP StoreAll 8200 Installation Manual preview
StoreAll 8200
Brand: HP Pages: 252
HP StorageWorks 600 - Modular Disk System Maintenance And Service Manual preview
StorageWorks 600 - Modular Disk System
Brand: HP Pages: 63

Brands by name

Popular brands

Load more brands