HP StorageWorks 4400, Installation Manual

Page: 79 / 86

11 Using and monitoring your storage
NOTE:
Monitoring capabilities are not currently supported by HP Command View EVA 8.1 on the management
module. To ensure continued monitoring capabilities, use HP Command View EVA 8.0.2 or earlier
on the management server.
Using your storage
1. Start a server application.
2. Browse to a file system window and verify the drive letter of the virtual drive you have created.
Firmware recovery CD
A recovery CD containing the original XCS firmware installed on the array is shipped along with your
EVA4400. The CD is only needed for recovery purposes. The latest firmware can be found on the
HP software depot web page:
http://h20392.www2.hp.com/portal/swdepot/index.do
Install HP Insight Remote Support Software
HP recommends you install HP's Insight Remote Support software, (part number RSSWMBASE) from
www.software.hp.com , to complete this installation. HP Insight Remote Support helps you reduce
costs, save time and ensure maximum system availability by providing remote monitoring, intelligent
event diagnosis and the automatic secure submission of hardware event notifications. This technology
has been optimized for environments with 1-50 servers (maximum 100) and requires only a shared
Windows ProLiant hosting device. It will support HP ProLiant, BladeSystem, Integrity, HP 9000 servers
and HP EVA storage devices, and will be available at no extra cost as part of your warranty, HP
Care Pack Service or contractual support agreement with HP. For more information access the Insight
RS quick start guide at
http://docs.hp.com/en/netsys.html#Insight%Remote%20Support .
HP StorageWorks 4400 Enterprise Virtual Array installation guide 79