HP StorageWorks 4400, Installation Manual

Page: 60 / 86

To manually uninstall all components, or to uninstall just one of the components, use one or all of the
following commands:
# rpm -e fibreutils
# rpm -e hp_qla2x00
# rpm -e hp_qla2x00src
Using the source RPM
In some cases, you may have to build a binary
hp_qla2x00
RPM from the source RPM and use that
manual binary build in place of the scripted
hp_qla2x00src
RPM. You need to do this if your
production servers do not have the kernel sources and
gcc
installed.
If you need to build a binary RPM to install, you will need a development machine with the same
kernel as your targeted production servers. You can install the binary RPM-produced RPM methods
on your production servers.
NOTE:
The binary RPM that you build works only for the kernel and configuration that you build on (and
possibly some errata kernels). Ensure that you use the 7.xx version of the
hp_qla2x00
source RPM
for 2.4 kernel-based distributions and the 8.xx version of the
hp_qla2x00
source RPM for 2.6
kernel-based distributions.
Use the following procedure to create the binary RPM from the source RPM:
1.
Select one of the following options:
• Enter the
#./INSTALL -S
command.
NOTE:
If you execute the
#./INSTALL -S
command, you do not have to complete step 2 through
step 4 .
• Install the source RPM by issuing the
# rpm -ivh hp_qla2x00- version-revi-
sion .src.rpm
command
2. Select one of the following directories:
• For Red Hat distributions, use the
/usr/src/redhat/SPECS
directory.
• For SUSE distributions, use the
/usr/src/packages/SPECS
directory.
3. Build the RPM by using the
# rpmbuild -bb hp_qla2x00.spec
command.
NOTE:
In some of the older Linux distributions, the RPM command contains the RPM build functionality.
At the end of the command output, the following message appears:
"Wrote: ...rpm".
This line identifies the location of the binary RPM.
4. Copy the binary RPM to the production servers and install it using the following command:
Configuring non-Windows application servers 60