HP StorageWorks 4400, Installation Manual

Page: 62 / 86

7. Press Insert or INS on your keyboard to add an unlisted driver.
8. Do one of the following:
• If you have the HAM driver and DDI file on a floppy disk, press
Enter .
• If you have the HAM driver and DDI file on another media such as a CD-ROM directory or
a drive, press F3 , and then specify the path to the files. A file specification can be similar to
the following:
C:\nwserver\
9. Select Modify , and then press Enter when the QL2x00 properties are displayed.
10. Select Return to Driver Summary , and then press Enter when the Additional Drivers screen is
displayed.
11. Select Continue from the Options menu, and then press Enter to load the driver.
12. Select Continue from the Protocol Options menu to exit.
NOTE:
If you have a Proliant server, ensure that CPQSHD.CDM is later than 2.0. Multipath I/O is not
supported on SP6 with CPQSHD.CDM.
Using the CFG.NLM utility
You can use the CFG.NLM utility to determine WWN numbers. To use the CFG.NLM utility:
1. Copy the CFG.NLM utility from the
C:\nwserver\drivers\unsupdrv
to the system directory
of the server.
2. From the console, enter the
cfg/I
command.
3.
Go to the Logger screen and copy the WWN numbers that are displayed.
4. Ensure that the host FCAs have been added by inspecting the Host folder in the Navigation pane
of HP Command View EVA.
Verifying virtual disks from the host
To scan the bus for the virtual disk and then display information about the EVA4400 devices:
Scan for new devices
Scan all LUNs
List storage adapters
OpenVMS
Updating the AlphaServer console code, Integrity Server console code, and
Fibre Channel FCA firmware
The firmware update procedure varies for the different server types. To update firmware, follow the
procedure described in the Installation instructions that accompany the firmware images.
Configuring non-Windows application servers 62