HP StorageWorks 4000/6000/8000 - Enterprise Virtual Arrays Reference Manual Download Page 220

Page: 220 / 456

IBM AIX SAN rules

This section describes the SAN rules for IBM AIX.

For current storage system support, see the SPOCK website at

http://www.hp.com/storage/spock

You must sign up for an HP Passport to enable access.

Table 103

describes the SAN configuration rules for IBM AIX.

Table 104

describes support for IBM

AIX multipathing coexistence.

Table 103 IBM AIX SAN configuration rules

IBM AIX SAN rules

Storage systems

•

Supports HACMP/ES Clusters. For specific version support, contact an HP storage representative.

•

Zoning is required when IBM AIX is used in a heterogeneous SAN with other operating systems.

•

Supports active/active and active/passive failover mode. A multipathing driver is required.

•

Supports multipathing high-availability configuration implemented in multiple fabrics or in a single
fabric with zoned paths.

•

For specific Secure Path zoning requirements, contact an HP storage representative.

•

Supports boot from SAN for XP storage systems. For more information, see “

XP and VA SAN boot

support

” on page 268.

•

For HP Continuous Access EVA configuration information, see “

HP Continuous Access EVA SAN in-

tegration

” on page 254.

All supported

Unlisted but supported storage systems have no additional SAN configuration restrictions. For the latest support information, contact an

HP storage representative.

Heterogeneous server rules

220

Summary of Contents for StorageWorks 4000/6000/8000 - Enterprise Virtual Arrays









































































































































































































































































































































































































































































Search results

Summary of Contents for StorageWorks 4000/6000/8000 - Enterprise Virtual Arrays

Reviews:

Related manuals for StorageWorks 4000/6000/8000 - Enterprise Virtual Arrays

Brands by name

Popular brands

HP StorageWorks 4000/6000/8000 - Enterprise Virtual Arrays, Reference Manual

Search results

Summary of Contents for StorageWorks 4000/6000/8000 - Enterprise Virtual Arrays

Reviews:

Related manuals for StorageWorks 4000/6000/8000 - Enterprise Virtual Arrays

Brands by name

Popular brands