C-series MDS 9216i, 9222i, IPS-4, IPS-8, 14/2 Multiprotocol Services Modules,
18/4 Multiservice Modules
The C-series MDS 9216i, MDS 9222i, IP Storage Services Modules (IPS-4, IPS-8), 14/2 Multiprotocol
Services Modules, and 18/4 Multiservice Modules provide MDS FCIP and iSCSI functionality.
The IPS-4, IPS-8, 14/2, and 18/4 modules integrate seamlessly into the C-series MDS 9000 switches
and support the full range of features, including VSANs, security, and traffic management.
You can use the C-series modules in the C-series 9500 and 9200 series switches. The IPS-4, IPS-8,
14/2, and 18/4 modules have four, eight, two, and four 1 Gb/s Ethernet ports, respectively.
Table 153
lists the features and requirements for the C-series modules.
Table 153 C-series MDS module features and requirements
Requirements
Feature
C-series MDS 9216/9216A/9216i Multilayer Fabric switches
C-series MDS 9222i Multiservice Fabric
C-series MDS 9513 Multilayer Director switch
C-series MDS 9506 Multilayer Director switch
C-series MDS 9509 Multilayer Director switch
Fibre Channel switch hardware support
for iSCSI and FCIP with the IP services
modules
TCP/IP IPv6, Ethernet 10 Mb/s, 100 Mb/s, and 1,000 Mb/s
Requires dedicated IP bandwidth, see
Table 157
and
Table 161
.
IP network protocols
Continuous Access EVA
XP Continuous Access
Notes:
•
Contact an HP storage representative for EVA and XP supported models.
See “
Heterogeneous server rules
” on page 185 for specific operating system support.
•
Continuous Access EVA requires a load balance setting of src-dst-id on all C-series
Fibre Channel switches (for the MDS 9020, the default setting is
src-dst-id
). XP
Continuous Access supports a load balance setting of
scr-dst-id
or
scr-dst-
ox-id
on all C-series Fibre Channel switches.
Storage systems
For Continuous Access EVA, see the
HP StorageWorks Enterprise Virtual Array compatibility
reference
matrix at
http://h18006.www1.hp.com/products/storage/software/
conaccesseva/index.html
.
FCIP-supported operating systems
For information about the C-series MDS modules, see
http://www.cisco.com/en/US/
products/hw/ps4159/ps4358/products_data_sheet09186a00800c465b.html
.
Documentation
HP storage replication products
HP provides the following storage replication products:
•
Continuous Access EVA with the EVA4000/4100/4400/6000/6100/6400/8000/8100/8400
using XCS
•
Continuous Access EVA with the EVA3000/5000 using VCS
•
XP Continuous Access with the XP family of storage systems
SAN Design Reference Guide
323
Summary of Contents for StorageWorks 4000/6000/8000 - Enterprise Virtual Arrays
