HP StorageWorks 4000/6000/8000 - Enterprise Virtual Arrays Reference Manual Download Page 272

Page: 272 / 456

•

Seamless, online, software and firmware upgrades

•

Selective storage presentation for SAN-based data zoning

•

Connectivity to Fibre Channel 2, 4, and 8 Gb/s switches

•

Support for up to sixteen 4-port arrays, eight 8-port arrays, or some other combination up to 64
ports

For more information, see the

HP StorageWorks SAN Virtualization Services Platform QuickSpecs

and

HP StorageWorks SAN Virtualization Services Platform design reference guide

, available for

download on the HP StorageWorks SAN Virtualization Services Platform website:

http://www.hp.com/go/SVSP

Software

HP SVSP software consists of the following:

•

HP StorageWorks SAN Virtualization Services Platform Business Copy for copies within an SVSP
domain

•

HP StorageWorks SAN Virtualization Services Platform Continuous Access for copies between
SVSP domains

•

HP StorageWorks SAN Virtualization Services Platform Thin Provisioning

•

HP StorageWorks SAN Virtualization Services Platform Volume Manager

•

HP StorageWorks Virtualization Services Manager (VSM)

•

HP StorageWorks Virtualization Services Manager Command Line Interface

The following operating systems are supported:

•

HP-UX 11i v2 and 11i v3

•

Red Hat Linux 4.0 and 5.0

•

SUSE Linux 10.0

•

Microsoft Windows Server 2003

•

Microsoft Windows 2008

•

Sun Solaris 10

•

VMware ESX 3.5, 3i

The following software is required:

•

Secure Path for HP-UX 11i v2

•

Native Multipath for HP-UX 11i v3

•

SAN Virtualization Services Platform DSM for Windows

For the latest product support information, see the product Quick Specs at http://www.hp.com/go/svsp
or SPOCK at:

http://www.hp.com/storage/spock

. You must sign up for an HP Passport to enable

access.

Hardware for a single SVSP domain

Hardware requirements are as follows:

•

Minimum of one EVA or MSA

•

High-availability dual-fabric environment (see

Level 4: multiple fabrics and device paths

(NSPOF)

on page 56)

•

IP-based intersite links (for SVSP Continuous Access)

SAN Virtualization Services Platform

272

Summary of Contents for StorageWorks 4000/6000/8000 - Enterprise Virtual Arrays









































































































































































































































































































































































































































































Search results

Summary of Contents for StorageWorks 4000/6000/8000 - Enterprise Virtual Arrays

Reviews:

Related manuals for StorageWorks 4000/6000/8000 - Enterprise Virtual Arrays

Brands by name

Popular brands

HP StorageWorks 4000/6000/8000 - Enterprise Virtual Arrays, Reference Manual

Search results

Summary of Contents for StorageWorks 4000/6000/8000 - Enterprise Virtual Arrays

Reviews:

Related manuals for StorageWorks 4000/6000/8000 - Enterprise Virtual Arrays

Brands by name

Popular brands