HP Pavilion dv5000 - Notebook PC User Manual Download

Page: 68 / 192

Removing an optical disc (with power)

If the computer is running on external or battery power:

Turn on the computer.

Press the release button

(1)

on the drive bezel to release the media tray, and then pull out the

tray

(2)

Remove the disc

(3)

from the tray by gently pressing down on the spindle while lifting the outer

edges of the disc. Hold the disk by the edges and avoid touching the flat surfaces.

NOTE

If the tray is not fully accessible, tilt the disc carefully as you remove it.

Close the media tray and place the disc in a protective case.

Chapter 4 Drives

ENWW

Summary of Contents for Pavilion dv5000 - Notebook PC

































































































































































































Search results

Summary of Contents for Pavilion dv5000 - Notebook PC

Reviews:

Related manuals for Pavilion dv5000 - Notebook PC

Brands by name

Popular brands

HP Pavilion dv5000 - Notebook PC, User Manual

Search results

Summary of Contents for Pavilion dv5000 - Notebook PC

Reviews:

Related manuals for Pavilion dv5000 - Notebook PC

Brands by name

Popular brands