HP Pavilion dv5000 - Notebook PC User Manual Download

Page: 110 / 192

Inserting an ExpressCard

CAUTION

To prevent damage to the computer and external media cards, do not insert an

ExpressCard into a PC Card slot or a PC Card into an ExpressCard slot.

CAUTION

To prevent damage to the connectors:

Use minimal force to insert an ExpressCard.

Do not move or transport the computer when an ExpressCard is in use.

The ExpressCard slot may contain a protective insert. The insert must be released and then
removed before you can insert an ExpressCard.

To release and remove the ExpressCard slot insert:

Press the insert

(1)

firmly inward, and then quickly release it.

Gently pull the insert out of the slot

(2)

To insert an ExpressCard:

Hold the card label-side up, with the connectors facing the computer.

100

Chapter 6 External Media Cards

ENWW

Summary of Contents for Pavilion dv5000 - Notebook PC

































































































































































































Search results

Summary of Contents for Pavilion dv5000 - Notebook PC

Reviews:

Related manuals for Pavilion dv5000 - Notebook PC

Brands by name

Popular brands

HP Pavilion dv5000 - Notebook PC, User Manual

Search results

Summary of Contents for Pavilion dv5000 - Notebook PC

Reviews:

Related manuals for Pavilion dv5000 - Notebook PC

Brands by name

Popular brands