HP HPE Alletra 6010 Hardware Manual Download Page 2 | Manualshive

Page: 2 / 117

background image

Legal Notices

Copyright

©

2022 by Hewlett Packard Enterprise Development LP

Notices

The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products
and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be
construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or
omissions contained herein.

Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession, use, or copying. Consistent
with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Com-
mercial Items are licensed to the U.S. Government under vendor's standard commercial license.

Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard Enterprise has no control
over and is not responsible for information outside the Hewlett Packard Enterprise website.

Hewlett Packard Enterprise believes in being unconditionally inclusive. If terms in this document are recognized as offensive or
noninclusive, they are used only for consistency within the product. When the product is updated to remove the terms, this document
will be updated.

Acknowledgments

Intel

®

, Itanium

®

, Pentium

®

, Intel Inside

®

, and the Intel Inside logo are trademarks of Intel Corporation in the United States and other

countries.

Microsoft

®

and Windows

®

are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or

other countries.

Adobe

®

and Acrobat

®

are trademarks of Adobe Systems Incorporated.

Java

®

and Oracle

®

are registered trademarks of Oracle and/or its affiliates.

UNIX

®

is a registered trademark of The Open Group.

All third-party marks are property of their respective owners.

Publication Date

Friday May 20, 2022 16:51:02

Document ID

cml1583951384476

Support

All documentation and knowledge base articles are available on HPE InfoSight at https://infosight.hpe.com. To register for
HPE InfoSight, click the Create Account link on the main page.

Email: [email protected]

For all other general support contact information, go to https://www.hpe.com/us/en/services/nimble-storage.html.

Legal Notices ii

Documentation Feedback: [email protected]

«
1
2
3
4
...
»

Summary of Contents for HPE Alletra 6010






















































































































Reviews:

No comments

Related manuals for HPE Alletra 6010

Brand: IAC INDUSTRIES Pages: 9

Brand: Quantum Pages: 9

Brand: Quantum Pages: 2

Brand: Quantum Pages: 11

Brand: Quantum Pages: 7

Brand: Quantum Pages: 10

Brand: Quantum Pages: 8

Brand: Tandberg Data Pages: 58

ValueLoader DLT VS80

Brand: Quantum Pages: 50

StorageLoader DLT VS160

Brand: Tandberg Data Pages: 13

StorageLoader DLT VS160

Brand: Tandberg Data Pages: 46

StorageLibrary LTO-3 SCSI

Brand: Tandberg Data Pages: 2

SDLT220-320 INTEGRATION

Brand: Tandberg Data Pages: 142

Brand: Tandberg Data Pages: 3

Brand: Tandberg Data Pages: 12

Brand: HGST Pages: 2

Brand: US Robotics Pages: 156

Brand: Buffalo Pages: 77

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands