HP HPE Alletra 6010 Hardware Manual Download Page 35 | Manualshive

Page: 35 / 117

background image

Procedure

1. Plug power cables into the power supplies.

2. Verify that the connection is secure.

3. Plug the other end of the power cables into the power circuit.

To minimize the risk of both power supplies for a controller losing power simultaneously, connect each power cable to a
different circuit.

If the array does not come online automatically, press and release the power button

on the front of the chassis.

Initial Setup Using the Storage Setup Manager for Windows

After your array has been installed in the rack and connected to your network, you must complete the initial setup of the array
by configuring some basic settings to get the array running on the network.

This chapter describes using the HPE Storage Setup Manager for Windows, which has been installed on a Windows host as
part of the HPE Storage Toolkit for Windows, to complete the initial setup. The setup manager has a graphical user interface
(GUI) that allows you to easily complete the initial setup.

Note: If you do not have a Windows host from which to complete the initial setup, you must use the CLI. For more
information, see Initial Setup Using the CLI on page 40.

After the initial setup is complete, refer to the GUI Administration Guide or the CLI Administration Guide for group and volume
configuration, and additional optional configuration tasks.

Download the HPE Storage Toolkit for Windows

Download the latest version of the HPE Storage Toolkit for Windows to install on your Windows host or Windows VM.

Important: Make sure that the version of the toolkit is compatible with the version of the operating system on your
array. For compatibility information, see the Validated Configuration Matrix tool, which is available on HPE InfoSight
(https://infosight.hpe.com/resources/nimble/validated-configuration-matrix).

Before you begin

What you need on a Windows server:

•

Internet connection to HPE InfoSight

•

.NET Framework 4.5.2

What you need on a Windows client:

•

Internet connection to HPE InfoSight

•

Windows OS 7 or later

•

.NET Framework 4.5.2

Procedure

1. In your Internet browser, go to https://infosight.hpe.com/welcomecenter.

2. In Welcome Center, click HPE Alletra Storage Array.

3. Select the array model and click Continue.

4. In the navigation panel, click Software Configuration > Prepare Client.

5. Follow the instructions to download the toolkit.

6. Save the installation package to your Windows host.

Install the HPE Storage Array 35

Documentation Feedback: [email protected]

«
...
33
34
35
36
37
...
»

Summary of Contents for HPE Alletra 6010






















































































































Reviews:

No comments

Related manuals for HPE Alletra 6010

Starck Mobile USB 3.0

Brand: LaCie Pages: 2

Brand: LaCie Pages: 2

Rugged Thunderbolt

Brand: LaCie Pages: 4

Rugged All-Terrain

Brand: LaCie Pages: 37

LaCinema Classic HD

Brand: LaCie Pages: 81

Brand: LaCie Pages: 4

Brand: WATSON Pages: 12

A16F-R2431 Galaxy Raid

Brand: Rorke Data Pages: 110

Colonial Pinehurst

Brand: Little Cottage Pages: 19

Brand: Microdia Pages: 1

BARRACUDA 7200.10 ST3160215AS

Brand: Seagate Pages: 2

Brand: DuraMax Pages: 81

Brand: Eastech Flow Controls Pages: 2

TOWERSTOR TS5CT

Brand: Sans Digital Pages: 33

Brand: Newpo Pages: 5

IC25N040ATCS04 - Travelstar 40 GB Hard Drive

Brand: IBM Pages: 217

CLARiiON CX4-120

Brand: EMC Pages: 62

Brand: QNAP Pages: 49

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands