HP HP 830 Series, Configuration Manual

Page: 62 / 530

50
Item Description
Speed
Set the transmission rate of the port:
•
10 —10 Mbps.
•
100 —100 Mbps.
•
1000 —1000 Mbps.
•
Auto —Autonegotiation.
•
Auto 10 —Autonegotiated to 10 Mbps.
•
Auto 100 —Autonegotiated to 100 Mbps.
•
Auto 1000 —Autonegotiated to 1000 Mbps.
•
Auto 10 100 —Autonegotiated to 10 or 100 Mbps.
•
Auto 10 1000 —Autonegotiated to 10 or 1000 Mbps.
•
Auto 100 1000 —Autonegotiated to 100 or 1000 Mbps.
•
Auto 10 100 1000 —Autonegotiated to 10, 100, or 1000 Mbps.
Duplex
Set the duplex mode of the port:
•
Auto —Autonegotiation.
•
Full —Full duplex.
•
Half —Half duplex.
Link Type
Set the link type of the current port: hybrid or trunk. For more information, see
"Configuring VLANs."
IMPORTANT:
To change the link type of a port from trunk to hybrid, or vice versa, you must first set its link
type to access .
PVID
Set the default VLAN ID of the interface. For more information about setting the PVID, see
"Configuring VLANs."
IMPORTANT:
To make sure a link properly transmits packets, the trunk or hybrid ports at the two ends of
the link must have the same PVID.