117
6.
Configure a target host SNMP traps:
a.
Click
Add
on the
Trap
tab page.
The page for adding a target host of SNMP traps appears.
Figure 116
Adding a trap target host
b.
Select the
IPv4
option, enter
1.1.1.2
in the subsequent field, enter
user1
in the
Security Name
field, select
v3
from the
Security Model
list, and select
Auth/Priv
from the
Security Level
list.
c.
Click
Apply
.
Configuring the NMS
CAUTION:
The configuration on the NMS must be consistent with the configuration on the agent. Otherwise, you
cannot perform corresponding operations.
To configure the NMS:
1.
Specify the SNMP version for the NMS as v3.
2.
Create an SNMP user
user1
.
3.
Enable both authentication and privacy functions
4.
Use MD5 for authentication and DES56 for encryption.
5.
Set the authentication key to
authkey
and the privacy key to
prikey
.
For information about configuring the NMS, see the NMS manual.
Verifying the configuration
•
After the configuration, the NMS can establish an SNMP connection with the agent and query and
reconfigure values of objects in the agent MIB.
•
Disable or enable an idle interface on the agent, and you can see the interface state change traps
on the NMS.
Summary of Contents for HP 830 Series
