HP E4401B, Programmer'S Manual

Page: 326 / 398

Con
ver
sion Guide
35
HP 8590/HP ESA Spectr
um Analyz
ers Con
version Guide
MKACT
MKACT 1|2|3|4
MKACT?
:CALCulate:MARKer[1]|2|3|4:STATe ON|1
<no SCPI equivalent>
Specifies the active marker.
The HP 8590-Series analyzer outputs data in
the format: 1. The HP ESA analyzer outputs
data in the format: +1.
MKACTV Makes the current active marker the active
function.
MKBW Returns the bandwidth at the specified power
level relative to an on-screen marker (if
present) or the signal peak (if no on-screen
marker is present).
MKCF
:CALCulate:MARKer[1]|2|3|4[:SET]:CENTer
Sets the center frequency equal to the marker
frequency and moves the marker to the center
of the screen.
Sets the center frequency equal to the specified
marker frequency, which moves the marker to
the center of the screen.
MKCONT Resumes the sweep after execution of a
MKSTOP command.
MKD
:CALCulate:MARKer[1]|2|3|4:MODE DELTa
or,
:CALCulate:MARKer[1]|2|3|4:X <param>
Activates the delta marker.
Positions the designated marker on the
assigned trace at the specified X value. The
value is in the x axis units (which is often
frequency or time).
HP 8590-Series
Analyzers
Command(s) Corresponding SCPI Command(s) Description/Comments