manualshive.com logo in svg

HP Compaq Presario,Presario 2140, User Manual

The HP Compaq Presario, Presario 2140 boasts a user-friendly design and exceptional performance. Maximize your experience with this powerful laptop by accessing its comprehensive User Manual, available for free download at manualshive.com. Discover all the features and functionalities of this product effortlessly with our detailed manual.

Share
Download
background image

Using Maintenance Features

179

Director Product Manager User Guide

Enable Call-Home Notification

The call-home feature enables the HAFM server to automatically contact a 
support center to report system problems. The support center server accepts calls 
from the HAFM server, logs reported events, and notifies one or more support 
center representatives.

Use the Enable Call Home Notification function on the Product Manager to 
enable call-home notification for events that occur on the selected director. The 
default state is disabled.

Notes

■

You must enable Call-Home Event Notification through the StorageWorks 
HAFM application Maintenance menu before enabling this function through 
the Product Manager for individual directors. A choice of two Call Home 
features is provided when HAFM is installed.

■

In legacy HP environments, call-home notification for directors and switches 
requires installation of Proactive Service software. This service is offered at 
no additional charge for subsystems covered under an on-site warranty or 
on-site storage hardware support contract. To register or order Proactive 
Services software, contact your HP customer service representative.

■

In classic HP environments, configure telephone numbers and other 
information for the call-home feature through the Windows dial-up 
networking application. To enable call-home notification for a director, refer 
to the HP StorageWorks HAFM server installation guide.

A check mark displays next to the menu option to indicate that call-home 
notification is enabled.

Summary of Contents for Compaq Presario,Presario 2140





















































































































































































































































Reviews:

No comments

Related manuals for Compaq Presario,Presario 2140

Jack F5 Manual Book preview
F5
Brand: Jack Pages: 8
Jack F5 Operation Manual preview
F5
Brand: Jack Pages: 10
Oki OF5700 Guía De Referencia Rápida preview
OF5700
Brand: Oki Pages: 16
Garudan GOV-1004-24 User Manual preview
GOV-1004-24
Brand: Garudan Pages: 79
U.S. Products Agitator 20 Information & Operating Instructions preview
Agitator 20
Brand: U.S. Products Pages: 10
W6 W6 N 454D Manual preview
W6 N 454D
Brand: W6 Pages: 48
W6 WERTARBEIT N 656D Free Arm Manual preview
WERTARBEIT N 656D Free Arm
Brand: W6 Pages: 102
FONESTAR FOG-9LED Instruction Manual preview
FOG-9LED
Brand: FONESTAR Pages: 16
Quasar Autopax PAX200H User Manual preview
Autopax PAX200H
Brand: Quasar Pages: 76
GBC ibico clickman Instruction Manual preview
ibico clickman
Brand: GBC Pages: 10
Singer 6-2 Instructions For Timing And Adjusting preview
6-2
Brand: Singer Pages: 18
SunStar KM-590BL User Manual preview
KM-590BL
Brand: SunStar Pages: 23
Panasonic KX-PW720DLE6 Quick Reference Manual preview
KX-PW720DLE6
Brand: Panasonic Pages: 24
SunStar SJS/A-BA2 User Manual preview
SJS/A-BA2
Brand: SunStar Pages: 46
Janome 15822 Servise Manual preview
15822
Brand: Janome Pages: 25
Nilfisk-Advance SR 9772 56109414 Instructions For Use Manual preview
SR 9772 56109414
Brand: Nilfisk-Advance Pages: 40
MBM 207M Operation Manual preview
207M
Brand: MBM Pages: 20
UnionSpecial 39500 GR Instructions For Adjusting And Operating preview
39500 GR
Brand: UnionSpecial Pages: 16

Brands by name

Popular brands

Load more brands