manualshive.com logo in svg

HP Compaq Presario,Presario 2140, User Manual

The HP Compaq Presario, Presario 2140 boasts a user-friendly design and exceptional performance. Maximize your experience with this powerful laptop by accessing its comprehensive User Manual, available for free download at manualshive.com. Discover all the features and functionalities of this product effortlessly with our detailed manual.

Share
Download
background image

Monitoring and Managing the Director

106

Director Product Manager User Guide

■

Node Properties

■

Port Technology

■

Block Port

■

Enable Beaconing

■

Port Diagnostics

■

Channel Wrap (FICON Management Style only)

■

Swap Ports (FICON Management Style only)

■

Clear Link Incident Alerts

■

Reset Port

■

Port Binding

■

Clear Threshold Alerts

Note:  

For Node Properties, if a node is not logged in, a message displays 

indicating that node information is not available.

Bar Graph Display

The Performance View provides a graphical display of performance for all ports. 
Each bar graph in the upper portion of the view panel displays the level of 
transmit/receive activity for the port. This information updates every five seconds. 
Each bar graph shows the percentage of link utilization for the port. A red arrow 
marks the highest utilization since the opening of the Performance View. If the 
system detects activity on a port, it represents minimal activity with one bar.

When a port is logged in, moving the cursor over its bar graph displays a message 
with the attached port’s WWN. If the port is an E_Port, the message reads 

E_Port

 and if the port is not logged in, the message displays the port’s current 

operational state (refer to 

Table 4

).

Port Statistics

To choose and display more detailed performance information for a port, click the 
port’s bar graph. The bar graph for that port highlights with a darker background, 
and the lower portion of the Performance View panel displays the statistics 
values for the port’s number and the WWN decoding. The Statistics Values 
tables contain cumulative port statistics and error statistics for transmit and 

Summary of Contents for Compaq Presario,Presario 2140





















































































































































































































































Reviews:

No comments

Related manuals for Compaq Presario,Presario 2140

Janome 1200D Brochure preview
1200D
Brand: Janome Pages: 2
Panasonic KX-FPG175 Description preview
KX-FPG175
Brand: Panasonic Pages: 2
Janome 415 Servicing Manual preview
415
Brand: Janome Pages: 45
Janome 415 Instruction Book preview
415
Brand: Janome Pages: 32
Fellowes Galaxy e Wire Instruction Manual preview
Galaxy e Wire
Brand: Fellowes Pages: 7
National Flooring Equipment 5274 Operating Manual preview
5274
Brand: National Flooring Equipment Pages: 12
Singer 138W101 Instructions For Using And Adjusting preview
138W101
Brand: Singer Pages: 12
Olivetti OFX8800 Instruction Handbook Manual preview
OFX8800
Brand: Olivetti Pages: 151
Janome Memory Craft 11000 Installation Instructions Manual preview
Memory Craft 11000
Brand: Janome Pages: 21
MyBinding Akiles WBM-532 Instruction Manual preview
Akiles WBM-532
Brand: MyBinding Pages: 3
GBC DocuBind P100 Operating Instructions preview
DocuBind P100
Brand: GBC Pages: 1
Qtx QTFX-LBF1 User Manual preview
QTFX-LBF1
Brand: Qtx Pages: 6
Janome DKS100 SE Instruction Book preview
DKS100 SE
Brand: Janome Pages: 61
Tacony Truvox International Orbis Compact User Manual preview
Truvox International Orbis Compact
Brand: Tacony Pages: 14
KLINDEX MAXI QUADRA Manual Book preview
MAXI QUADRA
Brand: KLINDEX Pages: 32
Fimap MMg base Use And Maintenance Manual preview
MMg base
Brand: Fimap Pages: 44
Kettler 07874-950 Manual preview
07874-950
Brand: Kettler Pages: 12
morse 200 Instruction Manual preview
200
Brand: morse Pages: 9

Brands by name

Popular brands

Load more brands