manualshive.com logo in svg

HP Compaq Presario,Presario 2140, User Manual

The HP Compaq Presario, Presario 2140 boasts a user-friendly design and exceptional performance. Maximize your experience with this powerful laptop by accessing its comprehensive User Manual, available for free download at manualshive.com. Discover all the features and functionalities of this product effortlessly with our detailed manual.

Share
Download
background image

Configuring the Director

157

Director Product Manager User Guide

Backing Up and Restoring Configuration Data

You can back up the NV-RAM configuration, which includes all of the data you 
input through instructions in this chapter, using the Backup and Restore 
Configuration option. This option is available through the Maintenance menu. 
Selecting this option backs up the configuration data to a file on the HAFM server 
hard drive. The restore function writes this data back to NV-RAM on the switch. 
Using the restore function overwrites the existing configuration. For more 
information, refer to “

Backup and Restore Configuration

” on page 180.

In addition to the Backup and Restore Configuration option, the backup 
application automatically backs up configuration and other critical data from the 
HAFM server. As long as backup media remains in the backup drive of the 
HAFM server (either an Iomega Zip drive or internal CD-RW drive, depending on 
your HAFM server platform), data is written to the backup media whenever the 
directory contents change or you reboot the HAFM server. For more information, 
refer to “

Backing Up and Restoring Product Manager Data

” on page 64.

Note:  

We do not recommend changing the default backup settings.

Note:  

To ensure trouble-free backups, it is imperative that you leave the backup 

media in the drive at all times. Removing the media during a backup or restore can 

corrupt the database on the media. Make sure that data is not being written to or read 

from the backup drive before you remove the backup media by observing the 

following:

■

The Iomega QuikSync icon in the Windows system tray spins when data is being 

written to or read from the Zip drive.

■

The CD-RW drive write LED flashes when data is being written to disk.

Summary of Contents for Compaq Presario,Presario 2140





















































































































































































































































Reviews:

No comments

Related manuals for Compaq Presario,Presario 2140

Bartell B424 Owner'S Manual And Parts Book preview
B424
Brand: Bartell Pages: 30
Kärcher BR 45/22 C Manual preview
BR 45/22 C
Brand: Kärcher Pages: 56
Nobles Speed Scrub 2601 Operator And Parts Manual preview
Speed Scrub 2601
Brand: Nobles Pages: 75
National Flooring Equipment BINDPRO Instruction Manual preview
BINDPRO
Brand: National Flooring Equipment Pages: 36
Tornado KARCHER BD 700 Operating Instructions Manual preview
KARCHER BD 700
Brand: Tornado Pages: 54
Windsor QK32 Operating Instructions Manual preview
QK32
Brand: Windsor Pages: 30
Kärcher Windsor Chariot 3 iExtract 26 Duo Operating Instructions Manual preview
Windsor Chariot 3 iExtract 26 Duo
Brand: Kärcher Pages: 151
Kärcher BD 44 180 Manual preview
BD 44 180
Brand: Kärcher Pages: 54
Pfaff 5483 Series Adjustment Manual preview
5483 Series
Brand: Pfaff Pages: 50
Carina 340336 1910 Operation And Safety Notes preview
340336 1910
Brand: Carina Pages: 30
Officezone GBC/VeloBind System Three Pro Operating Instructions Manual preview
GBC/VeloBind System Three Pro
Brand: Officezone Pages: 7
Fellowes Binding Machine Instructions Manual preview
Binding Machine
Brand: Fellowes Pages: 11
American Games MAXIM 4200 Operator'S Manual preview
MAXIM 4200
Brand: American Games Pages: 16
JUKI Union Special 36200L220-60 Adjusting Instructions And Illustrated Parts List preview
Union Special 36200L220-60
Brand: JUKI Pages: 56
Crane Snack Eenter I Troubleshooting & Repair Manual preview
Snack Eenter I
Brand: Crane Pages: 66
Stern Pinball WWE PRO 500-55G1-00 Service And Operation Manual preview
WWE PRO 500-55G1-00
Brand: Stern Pinball Pages: 60
Martin Yale 1811 Operating Manual preview
1811
Brand: Martin Yale Pages: 8
MiniMag 17'' DISK PAD ASSIST Operating Instructions Manual preview
17'' DISK PAD ASSIST
Brand: MiniMag Pages: 44

Brands by name

Popular brands

Load more brands