HP Compaq Presario,Presario 2140, User Manual

Page: 78 / 244

Monitoring and Managing the Director
78 Director Product Manager User Guide
Note: The director model and firmware may not support 2 Gb/sec data speeds.
■
Switch Binding. Enabled if the optional SANtegrity Binding features are
installed and enabled, otherwise Disabled displays.
Note: You can also display the Director Properties dialog box when you right-click
the director illustration away from a FRU and choose Properties from the menu.
Using Menu Options
Right-click various parts of the Hardware View to display menu options for
displaying status and information and for controlling the director and its FRUs.
Director Menu
Right-click any area of the director illustration where a hardware component is
not installed to display the following menu options:
Director Properties
Click to display the Director Properties dialog box. This dialog box contains the
director name, description, location, director data speed, and contact person
configured through the Configure Identification dialog box. Also included is
other product information as detailed in “
Displaying Director Information ” on
page 76. You can also display this dialog box when you click an area on the
illustration away from a hardware component.
Enable Unit Beaconing
Click the check box to toggle unit beaconing on or off. When the check box has a
check mark, unit beaconing is on, and the amber system error light on the director
front bezel blinks to help users locate the actual unit in an equipment room. When
you click the check box to remove the check mark, unit beaconing is disabled and
the amber LED goes out.
Note: You can only enable beaconing if there are no system errors (the system error
light is off).