manualshive.com logo in svg

HP Compaq Presario,Presario 2140, User Manual

The HP Compaq Presario, Presario 2140 boasts a user-friendly design and exceptional performance. Maximize your experience with this powerful laptop by accessing its comprehensive User Manual, available for free download at manualshive.com. Discover all the features and functionalities of this product effortlessly with our detailed manual.

Share
Download
background image

Optional Features

201

Director Product Manager User Guide

box, you cannot enter a value into the Threshold % column for the 
port. If you click the check box to remove the checkmark, any value 
that was set in the Threshold % column for the port will redisplay.

— Click in the Threshold % column and enter a value in the range of 1 

through 99.

Note:  

If no threshold is entered for a port, a default value is used that is based 

on port type (1 Gb/sec or 2 Gb/sec) and channel bandwidth. This field 

cannot be left blank.

4. Set Event Notification options.

Note:  

If enabled, these notifications occur the first time the events occur. 

Notifications are not resent while the problem persists.

— Unresolved Congestion. Click this check box to display a checkmark and 

enable notification. If enabled, an “unresolved congestion” entry is made 
to the Event Log and an SNMP trap will be generated, if trap recipients 
are configured through the Configure SNMP dialog box.

An unresolved congestion event occurs when the rerouting algorithm 
cannot find a path for rerouting data flow and relieving congestion on an 
ISL.

— Back Pressure. Click this check box to display a checkmark and enable 

this option. If enabled, a back pressure entry will be made to the Event 
Log and an SNMP trap will be generated if trap recipients are configured 
through the Configure SNMP dialog box. 

A back pressure event occurs when the percentage of time the ISL has no 
available BB_Credit exceeds the Low BB_Credit threshold. A separate 
event also occurs when the back pressure condition ends.

5. Set the Low BB_Credit Threshold.

Note:  

Using default settings for Low BB_Credit Threshold should work well in most 

cases. This step is not required.

Summary of Contents for Compaq Presario,Presario 2140





















































































































































































































































Reviews:

No comments

Related manuals for Compaq Presario,Presario 2140

Fellowes TB450 Manual preview
TB450
Brand: Fellowes Pages: 9
Fellowes Star 150 Instruction Manual preview
Star 150
Brand: Fellowes Pages: 5
Fellowes Quasar Wire Instruction Manual preview
Quasar Wire
Brand: Fellowes Pages: 6
Fellowes Quasar E 500 User Manual preview
Quasar E 500
Brand: Fellowes Pages: 4
Fellowes Pulsar E 300 Instructions Manual preview
Pulsar E 300
Brand: Fellowes Pages: 76
Fellowes Pulsar E 300 User Manual preview
Pulsar E 300
Brand: Fellowes Pages: 6
Fellowes Metal E-200r Instructions Manual preview
Metal E-200r
Brand: Fellowes Pages: 8
Fellowes Galaxy e500 Instructions Manual preview
Galaxy e500
Brand: Fellowes Pages: 74
Siruba LKS-1900AN Instruction Book preview
LKS-1900AN
Brand: Siruba Pages: 91
Viper 50000572 Instructions For Use Manual preview
50000572
Brand: Viper Pages: 93
Singer M3220 User Manual preview
M3220
Brand: Singer Pages: 99
Duerkopp Adler 742-115 Spare Parts preview
742-115
Brand: Duerkopp Adler Pages: 100
Ultraflex Easy Melt Air 1G Operation Manual preview
Easy Melt Air 1G
Brand: Ultraflex Pages: 22
Janome ME 4018 Instruction Book preview
ME 4018
Brand: Janome Pages: 63
Kärcher 1.139-108 Operating Instructions Manual preview
1.139-108
Brand: Kärcher Pages: 12
DURKOPP ADLER 745-35-10 D Service Instructions Manual preview
745-35-10 D
Brand: DURKOPP ADLER Pages: 338
Happy HCH Series Manual preview
HCH Series
Brand: Happy Pages: 2
Kärcher B 40 C Bp Quick Start preview
B 40 C Bp
Brand: Kärcher Pages: 5

Brands by name

Popular brands

Load more brands