HP Compaq Presario,Presario 2140, User Manual

Page: 139 / 244

Configuring the Director
139 Director Product Manager User Guide
2. Enter information into the appropriate fields.
3. Click the squares to either prohibit or allow connections. In Figure 39 , port
address 07 is prohibited from communicating with port address 05. Also, Port
OC is prohibited from communicating with all other port addresses.
4. Click Save As to open the Save Address Configuration As dialog box.
5. Click the Port Name field and enter a name.
Names must be between 1 and 8 characters in length. Valid characters are
uppercase A-Z, 0-9, hyphen (-), and underscore (_). The name may not be
CON, AUX, COMn (where n=1-9), LPTn (where n=1-9), NUL, or PRN.
Descriptions must be between 0 and 24 characters in length. Up to 24
alphanumeric characters allowed, including spaces, hyphens, and
underscores.
6. Click OK to save changes and to close the Save Address Configuration As
dialog box.
7. In the Configure Addresses - “Active” dialog box, click Activate to activate
the configuration or click Cancel to close without activating.
Note: If you click Cancel after saving, your configuration will still be added to the
library without being activated.
Managing Stored Address Configurations
FICON management style only. Once addresses configurations are created
through the Configure Addresses - “Active” dialog box they are saved to the
Address Configuration Library. Use this procedure to manage address
configurations in the Address Configuration Library.
To manage saved library entries:
1. Choose Addresses from the Configure menu on the menu bar, and then
choose Stored. The Address Configuration Library dialog box displays, as
shown in
Figure 40 .