HP Compaq Presario,Presario 2140, User Manual

Page: 84 / 244

Monitoring and Managing the Director
84 Director Product Manager User Guide
If you click the Enable Beaconing check box to add a check mark, the amber
LED beacons (blinks) on the card that was the active card before switchover.
Note: You must have maintenance authorization rights to access this feature.
Using the Port Card View
In the Hardware View, double-click a port card or right-click and choose Open
Port Card View to see a detailed view of the port card. In the Port Card View,
colored indicators reflect functions of the actual LEDs on the card. The table in
the Port Card View displays the port operating state and vital product
information.
Symbols and Indicators
The following figure illustrates the status symbols and LED indicators that may
display on a port card in the Port Card View.
Figure 22: Port Card View
1
An amber LED (at the top of the card) that illuminates if
any port fails or blinks if FRU beaconing is enabled.
2
A bank of amber and green LEDs above the ports. One
amber LED and one green LED are associated with
each port and indicate port status as follows:
■
The green LED illuminates (or blinks if there is active
traffic) and the amber LED extinguishes to indicate
normal port operation.
■
The amber LED illuminates and the green LED
extinguishes to indicate a port failure.
■
Both LEDs extinguish to indicate a port is
operational but not communicating with an N_Port
(no cable attached, loss of light, port blocked, or
link recovery in process).
■
The amber LED flashes and the green LED either
remains on, extinguishes, or flashes to indicate a
port is beaconing or running online diagnostics.
3
Four duplex LC connectors for attaching fiber optic
cables.
UPM
3
1
2