7–14
Hardware and Software Guide
Security
Changing DriveLock Passwords
To access the DriveLock settings in Computer Setup:
1. Shut down the notebook. If you are not sure whether the
notebook is off or in hibernation, turn the notebook on by
pressing the power button, and then shut down the notebook
through the operating system.
2. Be sure that the hard drive is inserted into the notebook
(not into an optional docking device or external MultiBay).
3. Open Computer Setup by turning on the notebook. Press
f10
while the F10 = ROM Based Setup message is displayed in
the lower left of the screen.
❏
To change the language, press
f2.
❏
For navigation instructions, press
f1.
4. Use the arrow keys to select
Security
> DriveLock
passwords,
and then press
enter.
5. Use the arrow keys to select the location of the hard drive,
and then press
f10.
6. Use the arrow keys to select the field for the password you
want to change. Type your current password in the
Old
password
field, and then type the new password in the
New password
field and in the
Verify new password
field.
Then press
f10.
7. To save your preferences, use arrow keys to select
File >
Save Changes and Exit,
and then follow the instructions on
the screen.
Your preferences are in effect when the notebook restarts.
