manualshive.com logo in svg

HP Compaq Notebook series, Hardware And Software Manual

Introducing the HP Compaq Notebook series – your gateway to unparalleled performance and reliability. Kickstart your experience with the user-friendly "Getting Started" manual. Download it for free from our website and unlock the full potential of your HP Compaq Notebook, ensuring a hassle-free usage journey.

Share
Download
background image

Wireless

Hardware and Software Guide

6–3

In addition to the wireless button and light, your notebook has 
software controls that enable you to turn on, turn off, enable, and 
disable your wireless devices. The following table explains the 
software controls.

Wireless Control

Description

Wireless Assistant

Is a software utility that enables you to turn on and 
off 802.11 and Bluetooth wireless devices 
individually. For more information on using 
Wireless Assistant, refer to the 

“Turning On, 

Turning Off, Enabling and Disabling the 802.11 
and Bluetooth Wireless Devices” 

section in this 

chapter.

Computer Setup 
controls

Enable and disable 802.11 and Bluetooth wireless 
devices in Computer Setup. For more information 
about using Computer Setup to control 802.11 and 
Bluetooth wireless devices, refer to 

Chapter 9, 

“Computer Setup.”

Summary of Contents for Compaq Notebook series







































































































































































































































Reviews:

No comments

Related manuals for Compaq Notebook series

AMILO Xa 3530 Quick Start Manual preview
Xa 3530
Brand: AMILO Pages: 70
EUROCOM TN120T Service Manual preview
TN120T
Brand: EUROCOM Pages: 90
TCL TAB10 Gen2 Quick Start Manual preview
TAB10 Gen2
Brand: TCL Pages: 14
Maibenben MaiBook S E-Manual preview
MaiBook S
Brand: Maibenben Pages: 44
Fujitsu LIFEBOOK T904 Ultrabook Operating Manual preview
LIFEBOOK T904 Ultrabook
Brand: Fujitsu Pages: 121
Fujitsu LIFEBOOK T935 Operating Manual preview
LIFEBOOK T935
Brand: Fujitsu Pages: 129
Fujitsu LIFEBOOK T904 Ultrabook User Manual preview
LIFEBOOK T904 Ultrabook
Brand: Fujitsu Pages: 196
Fujitsu LifeBook T902 Operating Manual preview
LifeBook T902
Brand: Fujitsu Pages: 131
Fujitsu LifeBook T902 User Manual preview
LifeBook T902
Brand: Fujitsu Pages: 392
Fujitsu LifeBook T901 Series User Manual preview
LifeBook T901 Series
Brand: Fujitsu Pages: 415
Fujitsu LIFEBOOK T935 Quick Start Manual preview
LIFEBOOK T935
Brand: Fujitsu Pages: 2
ECS G320 User Manual preview
G320
Brand: ECS Pages: 103
HP TouchSmart tx2-1000 - Notebook PC User Manual preview
TouchSmart tx2-1000 - Notebook PC
Brand: HP Pages: 30
HP TouchSmart tx2-1300 - Notebook PC User Manual preview
TouchSmart tx2-1300 - Notebook PC
Brand: HP Pages: 31
HP TouchSmart tx2-1000 - Notebook PC Maintenance And Service Manual preview
TouchSmart tx2-1000 - Notebook PC
Brand: HP Pages: 123
HP TouchPad and Keyboard User Manual preview
TouchPad and Keyboard
Brand: HP Pages: 236
Wortmann Terra Mobile 1511 series Concise User Manual preview
Terra Mobile 1511 series
Brand: Wortmann Pages: 62
Clevo P775TM Service Manual preview
P775TM
Brand: Clevo Pages: 130

Brands by name

Popular brands

Load more brands