HP Compaq Notebook series Hardware And Software Manual Download

Page: 33 / 230

Notebook Features

Hardware and Software Guide

1–23

Component

Description

Primary battery bay

Holds the primary battery pack.

Primary battery release
latches (2)

Release the primary battery pack from
the battery bay. The primary battery
locking latches must be in the
unlocked position.

Travel battery connector

Connects an optional travel battery.

Expansion memory module
compartment

Contains the expansion memory
module slot.

Hard drive bay

Holds the hard drive.

Vents (4)

Enable airflow to cool internal
components.

To prevent overheating, do not
obstruct vents. Using the
notebook on a soft surface, such
as a pillow, blanket, rug, or thick
clothing, may block airflow.

Summary of Contents for Compaq Notebook series







































































































































































































































Search results

Summary of Contents for Compaq Notebook series

Reviews:

Related manuals for Compaq Notebook series

Brands by name

Popular brands

HP Compaq Notebook series, Hardware And Software Manual

Search results

Summary of Contents for Compaq Notebook series

Reviews:

Related manuals for Compaq Notebook series

Brands by name

Popular brands