HP Compaq Notebook series Hardware And Software Manual Download

Page: 107 / 230

Hardware Components

Hardware and Software Guide

5–3

Adding a Drive to the System

Removable drives enable you to store and access data.

■

A standard drive can be added to the system by inserting the
drive into an optional docking device (select models only).

■

A USB drive can be added by connecting the drive to a USB
port on the notebook or optional docking device (select
models only).

For information about connecting a USB drive, refer to the

“Connecting a USB Device”

section in this chapter.

The notebook has 2 drive bays:

■

The hard drive bay supports only a hard drive.

■

The optical drive supports the following optical devices:

❏

CD-ROM drive

❏

DVD-ROM drive

❏

DVD/CD-RW Combo drive

❏

DVD±RW and CD-RW Combo Drive

Summary of Contents for Compaq Notebook series







































































































































































































































Search results

Summary of Contents for Compaq Notebook series

Reviews:

Related manuals for Compaq Notebook series

Brands by name

Popular brands

HP Compaq Notebook series, Hardware And Software Manual

Search results

Summary of Contents for Compaq Notebook series

Reviews:

Related manuals for Compaq Notebook series

Brands by name

Popular brands