HP Compaq Notebook series Hardware And Software Manual Download | Manualshive

Page: 93 / 230

background image

4–12

Hardware and Software Guide

Multimedia

Using WinDVD Creator Plus
(Select Models Only)

WinDVD Creator Plus can be used to create, edit, and burn
movies to a DVD or video CD. This software must be installed
from the

InterVideo WinDVD Creator

CD provided with select

notebooks.

WinDVD Creator Plus must be installed using a DVD/CD-RW
Combo Drive or a DVD±RW and CD-RW Combo Drive only. If
you do not use a DVD/CD-RW Combo Drive or DVD±RW and
CD-RW Combo Drive, WinDVD Creator Plus will not be
installed.

For more information about WinDVD Creator Plus capabilities
and instructions on creating DVDs and Video CDs, refer to the
WinDVD Creator Plus online Help after installing the software.

Using Sonic RecordNow!

RecordNow! can be used to create backups of data or audio CDs
or DVDs, transfer audio files from CDs to a hard drive, and create
personalized audio CDs. RecordNow! is preinstalled on your
notebook. For more information about RecordNow! capabilities
and instruction on creating data and audio CDs and DVDs, refer
to the Sonic RecordNow! Tutorial and online Help.

«
...
91
92
93
94
95
...
»

Summary of Contents for Compaq Notebook series







































































































































































































































Reviews:

No comments

Related manuals for Compaq Notebook series

2480 2779 - TravelMate

Brand: Acer Pages: 97

Brand: IBM Pages: 110

Brand: Magicbook Pages: 113

Barbie B-Bright

Brand: Oregon Scientific Pages: 16

Brand: ARIMA Pages: 58

V1020 - LifeBook - Core 2 Duo GHz

Brand: Fujitsu Pages: 168

Chromebook 100e Gen 3

Brand: Lenovo Pages: 40

Brand: Lenovo Pages: 31

Brand: Lenovo Pages: 33

Brand: Lenovo Pages: 31

Brand: Lenovo Pages: 34

Brand: Lenovo Pages: 34

Brand: Lenovo Pages: 39

Chromebook C340-15

Brand: Lenovo Pages: 62

deaPad Flex 5 14"

Brand: Lenovo Pages: 66

Chromebook C330

Brand: Lenovo Pages: 65

Chromebook C340

Brand: Lenovo Pages: 68

Chromebook IdeaPad Flex 5 13IML05

Brand: Lenovo Pages: 70

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands