HP Compaq Notebook series Hardware And Software Manual Download

Page: 195 / 230

8–4

Hardware and Software Guide

MultiBoot

Enabling Bootable Devices in
Computer Setup

The notebook can start up from a USB device or the NIC only if
that device has been enabled for inclusion in the boot sequence.

To enable a device or location for inclusion in MultiBoot:

1. Open Computer Setup by turning on or restarting the

notebook. Press

f10

while the F10 = ROM Based Setup

message is displayed in the lower-left corner of the screen.

❏

To change the language, press

f2.

❏

For navigation instructions, press

f1.

2. To enable bootable media in USB drives or in drives inserted

into an optional docking device (select models only), use the
arrow keys to select the

Advanced

menu >

Device Options.

Then select

Enable USB legacy support.

– or –

To enable a NIC, select the

Security

menu >

Device

Security,

and then select Internal network adapter boot.

3. Save your preferences and exit Computer Setup by using the

arrow keys to select

File > Save Changes and Exit.

Then

follow the instructions on the screen.

Your preferences are set when you exit Computer Setup, and they
take effect when the notebook restarts.

✎

To connect a NIC to a Preboot eXecution Environment (PXE) or
Remote Program Load (RPL) server during startup without using
MultiBoot, quickly press

f12

when the Network Service Boot

message appears in the lower-right corner of the screen (select
models only).

Summary of Contents for Compaq Notebook series







































































































































































































































Search results

Summary of Contents for Compaq Notebook series

Reviews:

Related manuals for Compaq Notebook series

Brands by name

Popular brands

HP Compaq Notebook series, Hardware And Software Manual

Search results

Summary of Contents for Compaq Notebook series

Reviews:

Related manuals for Compaq Notebook series

Brands by name

Popular brands