manualshive.com logo in svg

HP Compaq Notebook series, Hardware And Software Manual

Introducing the HP Compaq Notebook series – your gateway to unparalleled performance and reliability. Kickstart your experience with the user-friendly "Getting Started" manual. Download it for free from our website and unlock the full potential of your HP Compaq Notebook, ensuring a hassle-free usage journey.

Share
Download
background image

Power

Hardware and Software Guide

2–19

Using Battery Packs

When the notebook is connected to external AC power, the 
notebook runs on AC power. When a charged battery pack is in 
the notebook and the notebook is not connected to external 
power, the notebook runs on battery power.

The notebook switches between AC power and battery power 
according to the availability of an external AC power source. For 
example, if the notebook contains a charged battery pack and is 
running on external AC power supplied through the AC adapter, 
the notebook switches to battery power if the AC adapter is 
disconnected from the notebook.

You can leave a battery pack in the notebook or in storage, 
depending on how you work. Keeping a battery pack in the 
notebook enables the battery pack to charge whenever the 
notebook is connected to external AC power and also protects 
your work in case of a power outage.

On the other hand, battery packs in the notebook slowly discharge 
when the notebook is turned off. For this reason, the primary 
battery pack is not shipped inside the notebook and must be 
inserted before the notebook can run on battery power.

Summary of Contents for Compaq Notebook series







































































































































































































































Reviews:

No comments

Related manuals for Compaq Notebook series

Aspire TravelMate 2420 Series Service Manual preview
TravelMate 2420 Series
Brand: Aspire Pages: 108
Acer Swift 3 SF314-59 User Manual preview
Swift 3 SF314-59
Brand: Acer Pages: 85
Acer PREDATOR TRITON 300 SE User Manual preview
PREDATOR TRITON 300 SE
Brand: Acer Pages: 97
Acer AN515-57-72SA User Manual preview
AN515-57-72SA
Brand: Acer Pages: 78
Acer TravelMate 4150 Service Manual preview
TravelMate 4150
Brand: Acer Pages: 127
Lenovo 2516AEU Brochure preview
2516AEU
Brand: Lenovo Pages: 4
Clevo TN120R Service Manual preview
TN120R
Brand: Clevo Pages: 90
Prestigio PNT10131DEDB User Manual preview
PNT10131DEDB
Brand: Prestigio Pages: 15
Compaq Mini CQ10 Maintenance And Service Manual preview
Mini CQ10
Brand: Compaq Pages: 107
StarTech.com LTANCHORL Quick Start Manual preview
LTANCHORL
Brand: StarTech.com Pages: 2
StarTech.com LTLOCK3DCOIL Quick Start Manual preview
LTLOCK3DCOIL
Brand: StarTech.com Pages: 2
StarTech.com LTRISERP Instruction Manual preview
LTRISERP
Brand: StarTech.com Pages: 2
Gateway Solo 2150 User Manual preview
Solo 2150
Brand: Gateway Pages: 89
Werock Rockbook X130 User Manual preview
Rockbook X130
Brand: Werock Pages: 92
IBM MT 2643 Hardware Manual preview
MT 2643
Brand: IBM Pages: 116
VTech CHALLENGER 91-002136-014-000 User Manual preview
CHALLENGER 91-002136-014-000
Brand: VTech Pages: 20
VTech Color Blast Notebook User Manual preview
Color Blast Notebook
Brand: VTech Pages: 24
VTech ClassMaster XL Series User Manual preview
ClassMaster XL Series
Brand: VTech Pages: 47

Brands by name

Popular brands

Load more brands