manualshive.com logo in svg

HP Compaq dx7300, Reference Manual

The HP Compaq dx7300 user manual is an essential resource for getting acquainted with this versatile product. Obtain a comprehensive overview of its features and functions through this free manual download available at manualshive.com. Explore your device's potential and unleash its capabilities effortlessly with this user-friendly guide.

Share
Download
background image

3–8

433611-001

Service Reference Guide, dx7300

Desktop Management

This hot-key enters the Intel Management Engine BIOS Execution (ME Bx) setup utility. This 
utility allows the user to configure various aspects of the management technology. Configuration 
options include:

■

ME Platform Configuration

❏

ME Platform State Control—enable/disable management engine

❏

ME Firmware Local Update—local enable/disable management of firmware updates

❏

LAN Controller—enable/disable integrated network controller

❏

ME Features Control—enable AMT, ASF, or none

❏

ME Power Control—configure management engine power policies

■

Intel AMT Configuration

❏

Change AMT Password—required in order to configure AMT (the default password is 
admin)

❏

Host Name—allows administrator to assign a name to the client

❏

TCP/IP—allows administrator to assign an IP address or enable DHCP

❏

Provisioning Server—allows administrator to assign IP address of provisioning server

❏

Provision Model—allows administrator to configure either enterprise or SMB mode

❏

Set PID and PPS—allows administrator to provide pre-provisioning key (see HP’s white 
paper, 

Intel vPro Provisioning

)

❏

Un-Provision—allows administrator to reset AMT configuration to factory defaults

❏

VLAN—allows administrator to enable LAN virtualization support

❏

SOL/IDE-R—allows administrator to enable remote boot and control sessions

■

Change MEBx Password (HP highly recommends that this password be changed. The 
default password is admin.)

In order to remotely manage AMT systems, the administrator must use a remote console that 
supports AMT. Enterprise management consoles are available from suppliers such as HP 
OpenView, Altiris and Microsoft SMS. In SMB mode, the client provides a Web browser 
interface. To access this feature, open a browser from any other system on the network and enter 

http://host_name:16992

 where 

host_name

 is the name assigned to the system. 

Alternatively, the IP address may be used in place of the host name.

3.3.10 Proactive Change Notification

The Proactive Change Notification program uses the Subscriber's Choice Web site in order to 
proactively and automatically:

■

Send you Proactive Change Notification (PCN) e-mails informing you of hardware and 
software changes to most commercial computers and servers, up to 60 days in advance

■

Send you e-mail containing Customer Bulletins, Customer Advisories, Customer Notes, 
Security Bulletins, and Driver alerts for most commercial computers and servers

You create your own profile to ensure that you only receive the information relevant to a specific 
IT environment. To learn more about the Proactive Change Notification program and create a 
custom profile, visit 

http://h30046.www3.hp.com/subhub.php.

Summary of Contents for Compaq dx7300











































































































































































































































Reviews:

No comments

Related manuals for Compaq dx7300

IBM IntelliStation 6866 Hardware Maintenance Manual preview
IntelliStation 6866
Brand: IBM Pages: 148
Aaeon BOXER-64 Series Manual preview
BOXER-64 Series
Brand: Aaeon Pages: 90
Asus BT14675 User Manual preview
BT14675
Brand: Asus Pages: 16
Dell Precision 370 - SX280 Ultra Small Form Factor Quick Reference Manual preview
Precision 370 - SX280 Ultra Small Form Factor
Brand: Dell Pages: 162
Dell Inspiron 7500 System Reference Manual preview
Inspiron 7500
Brand: Dell Pages: 165
Sony PCG-VX88 VAIO User Guide (primary manual) Specifications preview
PCG-VX88 VAIO User Guide (primary manual)
Brand: Sony Pages: 1
Sony PCG-V505DC2K Specifications preview
PCG-V505DC2K
Brand: Sony Pages: 2
Sony PCG-V505DC2K Service Manual preview
PCG-V505DC2K
Brand: Sony Pages: 14
Sony PCG-SRX77 Specifications preview
PCG-SRX77
Brand: Sony Pages: 1
Sony PCG-K47 - VAIO - Mobile Pentium 4 3.2 GHz Specifications preview
PCG-K47 - VAIO - Mobile Pentium 4 3.2 GHz
Brand: Sony Pages: 1
Sony PCG-K45 - VAIO - Mobile Pentium 4 3.2 GHz Specifications preview
PCG-K45 - VAIO - Mobile Pentium 4 3.2 GHz
Brand: Sony Pages: 1
Sony PCG-K27 - VAIO - Mobile Pentium 4 3.06 GHz Specifications preview
PCG-K27 - VAIO - Mobile Pentium 4 3.06 GHz
Brand: Sony Pages: 1
Sony PCG-K25 - VAIO - Mobile Pentium 4 2.8 GHz Specifications preview
PCG-K25 - VAIO - Mobile Pentium 4 2.8 GHz
Brand: Sony Pages: 1
Sony PCG-K23 - VAIO - Mobile Pentium 4 2.8 GHz Specifications preview
PCG-K23 - VAIO - Mobile Pentium 4 2.8 GHz
Brand: Sony Pages: 1
Sony PCG-K45 - VAIO - Mobile Pentium 4 3.2 GHz Service Manual preview
PCG-K45 - VAIO - Mobile Pentium 4 3.2 GHz
Brand: Sony Pages: 23
Sony PCG-V505DC2K Quick Start Manual preview
PCG-V505DC2K
Brand: Sony Pages: 44
Sony PCG-FRV35 - VAIO - Pentium 4 2.66 GHz Service Manual preview
PCG-FRV35 - VAIO - Pentium 4 2.66 GHz
Brand: Sony Pages: 19
Sony PCG-4P1L Safety Information Manual preview
PCG-4P1L
Brand: Sony Pages: 24

Brands by name

Popular brands

Load more brands