HP 8560A, Service Manual

Page: 31 / 450

Table 1-4. Recommended Test Equipment
Instrument
Synthesized
Sweeper
(two required)
Critical Specifications
for Equipment Substitution
Frequency Range: 10 MHz to 7
Frequency Accuracy (CW): 1 x
Leveling Modes: Internal External
Modulation Modes: AM Pulse
Recommended Use
Model
HP
Synthesizer/
Level Generator
Power Level Range: -80 to
Frequency Range: 200 Hz to 80 MHz
Frequency Accuracy: 1 x
HP
Flatness: f0.15
Attenuator Accuracy:
Synthesized Frequency Range: 5 MHz to 2.5
HP 8663A
Signal Generator Residual SSB Phase Noise at 10 offset
(320 MHz <fc MHz): <-131 dBc/Hz
Pulse/Function Frequency Range: 10 to 50 MHz HP 8116A P
Generator Pulse Width: 200 ns;
Output Amplitude: 5 V peak-to-peak
Functions: Pulse Triangle
TTL Sync Output
AM/FM Frequency Range: 1 MHz to 200 MHz HP 8640B A
Signal Generator Frequency Modulation Mode
Modulation Oscillator Frequency: 1
FM Peak Deviation: 5
Microwave Frequency Range: 9 MHz to 6.9 HP
Frequency Counter Time base Accuracy (Aging):
x
of Option 001
External Frequency Reference Input
Universal Modes: TI
Frequency Count HP P
Counter Time Interval Measurement Range: 20 ms to 75 s
Frequency Measurement Range: 17 to 11 MHz
Frequency Resolution: 1 MHz at 10 MHz
External Frequency Reference Input
Time base accuracy (Aging):
x
Oscilloscope Bandwidth (3
dc to 100 MHz HP A , T
Minimum Vertical Deflection Factor: mV/div
Spectrum Analyzer Frequency Range: 4 to 7
HP
Typical Residual FM: Hz Pk-to-Pk in 100 ms
(Fundamental Mixing)
* Part of Microwave Workstation
P Performance Tests; A Adjustments; M Test Adjustment Module; T = Troubleshooting;
V Operation Verification
General Information 13