Home Repair Manuals Hotpoint WMA32 Dismantle & Repair
Page 30 of 50
(11) Solenoid valves……
Removal
1.
Remove the top
(1)
2.
Undo the water inlet hoses.
3.
Remove the wiring plugs. (You may need to use a small
screw driver for this).
4.
Press the lugs on either side of the valve in, whilst
turning it anti clockwise. (Start on the double valve
first).
5.
Remove internal hose.
(11a) Solenoid valves…..
Fitting
1.
Start with the single valve and fit the black internal hose; put a cable tie on it.
2.
Fit the valve into the hole in the cabinet.
3.
Twist it clockwise until it clicks in place
4.
Follow above steps for double valve.
5.
Fit wiring plugs. (The cables are colour coded for each valve).
6.
Reconnect water hoses.
7.
Replace the top
(1a)
