horsch Leeb 5.280 VL, Operating Instructions Manual

Page: 128 / 308

Operating terminal
Spraying operation and the vehicle settings are
controlled via the terminal in the cabin.
The graphic user interface shows and controls
current settings and measuring values of the
spraying operation. In addition, vehicle settings
can be made and data for road/field operation
can be monitored.
¾
Input and monitoring of data in spraying op-
eration
¾
Input and monitoring of vehicle data in road
and field operation
The ISOBUS-compatible Topcon X35 or Touch 1200
terminal is used on the machine.
Other ISOBUS compatible terminals may alter-
natively also be used. However, this should be
discussed with the HORSCH Service before
use.
NOTE
¾
Instructions for operating the terminal are in-
cluded in the supplied operating instructions!
¾
Instructions for operating the sprayer software
are included in the supplied terminal operating
instructions from HORSCH.
¾
When using an alternative terminal the re-
spective operating instructions issued by the
manufacturer must be followed!
Machine terminal
Current values of the vehicle for road or field
operation are displayed on the machine terminal.
Settings for the vehicle can only be made via the
operating terminal.
Ignition lock
For starting and stopping the engine of the
machine.
1
2
3
1 Switch off the ignition / shut-off the diesel engine
2 Switch on ignition
3 Start diesel engine
124 125