horsch Leeb 5.280 VL, Operating Instructions Manual

Page: 83 / 308

Mechanical height adjustment
WARNING
Increased risk of accident during height adjust-
ment!
¾
Pay attention to the notes from the safety
chapter!
¾
Always adjust the height only one axle at a
time; never raise the complete machine.
¾
Use the lifting equipment supplied for raising
¾
Perform only on a level and firm surface.
¾
Secure the vehicle against rolling.
¾
Drain the spraying mixture container and the
fresh water tank.
2
3
4
Wheel suspension mechanical height adjustment (the
figure shows the left front)
1
Locking screw detail
1
2
Retaining plate
Height adjustment up procedure:
¾
Drain the spraying mixture container and the
fresh water tank.
¾
Park the machine on level and paved ground.
¾
Secure the machine against rolling away.
¾
Place suitable lifting equipment to a suitable
spot and apply light pressure.
¾
Remove the three locking screws (1) and
screw them in again after the height adjust-
ment. Tightening torque: 64 Nm
¾
Remove the locking plate (2) including screws
and store safely.
78 79